HCC1001 TT Electronics

Hi-Reliability RAD Capable Optoisolator HCC1000 (Through Hole) HCC1001 (SMT) Features: TID Capable to 100Krad (SI)/cm2 ELDRS (0.1rad/s) Neutron capable to 1E12 neutrons (14MeV) Processed to MIL-STD-19500 TXV level 1 KV electrical Isolation Base Contact provided for conventional transistor biasing Description: These devices are similar to Opteks 4N series of opto isolators with exception of the chips. It is processed per MIL -PRF- 19500 TXV level and can be modified per customer SCDs. Each device consists of a IRLED & NPN transistor mounted in either hermetic TO -78 metal can, 6 pin SMD or custom packaging. Applications: Circuit Electrical Isolation in Space Applications such as Satellites, Launchers, Space Vehicles & Planetary Rovers. 1Anode 2N/C 3Collector 4Base 5Emitter 6Cathode HCC10016 pin SMT LCC Package HCC10006 leads metal can (TO-78) Package DIMENSIONS INCHES MILLIMETERS LTR MIN MAX MIN MAX DIMENSIONS A 0.066 0.080 1.68 2.03 INCHES MILLIMETERS A1 0.026 0.034 0.66 0.86 LTR MIN MAX MIN MAX B1 0.022 0.028 0.56 0.71 D 0.335 0.370 8.51 9.40 B2 .072 REF 1.83 REF D1 0.305 0.335 7.75 8.51 B3 0.006 0.022 0.15 0.56 B 0.016 0.019 0.41 0.48 D 0.165 0.175 4.19 4.44 45 T.P. 45 T.P. D1 0.095 0.105 2.41 2.67 F 0.040 1.02 D2 0.045 0.055 1.14 1.39 G 0.155 0.185 3.94 4.70 D3 0.175 4.44 J .100 T.P. 2.54 T.P. E 0.240 0.250 6.10 6.35 J1 .200 T.P. 5.08 T.P. E3 0.250 6.35 K 0.028 0.034 0.71 0.86 L1 0.060 0.070 1.65 1.78 K1 0.029 0.045 0.74 1.14 L2 0.082 0.098 2.08 2.49 L 0.500 0.600 12.70 15.24 L3 0.003 0.08 General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev C 07/2020 Page 1 TT electronics plc Hi-Reliability RAD Capable Optoisolator HCC1000 (Through Hole) HCC1001 (SMT) Electrical Specifications Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -55 C to +150 C Operating Temperature Range -55 C to +150 C (1) Input-to-Output Isolation Voltage 1.00 kVDC Lead Soldering Temperature (TO-78 Metal Can) 1/16 inch (1.6 mm) from case for 5 (2) 260 C seconds with soldering iron Soldering Temperature (SMD) Vapor Phase Reflow for 30 seconds 215 C Input Diode (LED) Forward DC Current (65 C or below) 40 mA Reverse Voltage 2 V (3) Power Dissipation 60 mW Output Phototransistor: Continuous Collector Current 50 mA Collector-Emitter Voltage 40 V Collector-Base Voltage 45 V 7.0 V Emitter -Base Voltage (4) Power Dissipation 300 mW Notes: 1. Measured with input leads shorted together and output leads shorted together. 2. RMA flux is recommended. 3. Derate linearly 1.0 mW/C above 65 C. 4. Derate linearly 3.0 mW/C above 25 C. General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev C 07/2020 Page 2 TT electronics plc