HM72E-06R33LFTR13 TT Electronics

High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 Operating & Storage Temperature -40C to +155C Temperature Rise, Maximum 50C Operating Frequency Up to 3MHz Specifications 25C Heating (1) (3) DCR (m) Inductance Isat (2) Part Number Current H20% (Adc) (Adc) Typ. Max. HM72E-06R10LF 0.10 26.2 45.0 1.5 1.7 HM72E-06R20LF 0.20 20.3 34.0 2.5 2.8 HM72E-06R33LF 0.33 18.0 22.0 3.2 3.9 HM72E-06R47LF 0.47 16.1 19.0 4.0 4.2 HM72E-06R68LF 0.68 14.4 16.5 5.0 5.5 HM72E-061R0LF 1.00 10.3 15.0 9.0 10.0 HM72E-061R5LF 1.50 8.4 10.0 13.0 14.0 HM72E-062R2LF 2.20 8.3 8.5 18.0 20.0 HM72E-063R3LF 3.30 6.6 8.0 26.5 30.0 HM72E-064R7LF 4.70 5.4 6.5 39.0 42.0 HM72E-06330LF 33.0 1.8 2.5 302.0 332.0 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the approximate DC current which causes the component temperature to increase by 50C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. (4) The part temperature (ambient + temperature rise) should not exceed 155C. Mechanical Outline Dimensions (mm) Recommended Top View Side View Bottom View PCB layout General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics own data and is considered accurate at time of going to print. www.bitechnologies.com TT electronics plc 07.13High Power High Performance Molded Surface Mount Inductors MODEL HM72E-06 Electrical Characteristic 25C L Vs I 4.800 4.600 4.400 06R10 4.200 06R20 4.000 3.800 06R33 3.600 06R47 3.400 3.200 06R68 3.000 2.800 061R0 2.600 061R5 2.400 2.200 062R2 2.000 063R3 1.800 1.600 064R7 1.400 1.200 1.000 0.800 0.600 0.400 0.200 0.000 02345689 10 12 14 15 16 18 20 21 22 24 25 26 27 28 30 33 35 36 40 45 50 55 60 65 DC CURRENT (A) Packing / Ordering Information One reel (13) 2000 pcs One shipping carton (6 reels) 12000 pcs HM72E - 06 R33 LF TR13 Model Series 13 tape & reel packing Case Size: Lead Free Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10H, R denotes the decimal point. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics own data and is considered accurate at time of going to print. www.bitechnologies.com TT electronics plc 07.13 INDUCTANCE (uH)