High Temperature Resistors Thick Film Chip Resistors High Temperature High Temperature High Temperature Thick Film Chip Resistors HTC Series Thick Film Chip Resistors Thick Film Chip Resistors Operation to 200C HTC Series Excellent high temperature stability Improved working voltage ratings Operation to 200C HTC Series HTC Series Pb-free wrap-around terminations Excellent high temperature stability Operation to 200C Standard chip sizes available from 1206 to 2512 Operation to 200C Improved working voltage ratings Excellent high temperature stability Excellent high temperature stability Pb-free wrap-around terminations Improved working voltage ratings Improved working voltage ratings Pb-free wrap-around terminations Standard chip sizes available from 1206 to 2512 Pb-free wrap-around terminations Standard chip sizes available from 1206 to 2512 Standard chip sizes available from 1206 to 2512 Electrical Data All All parts parts arare e Pb-Pb-frfree ee and and ccomply omply with with EU EU DirDirectivective e 2011/65/EU 2011/65/EU amended amended bby y (EU) (EU) 2015/863 2015/863 (R(RoHS3)oHS3) Characteristic 1206 2010 2512 Electrical Data Electrical Data 1W to 10MW 1%, 5% Characteristic 1206 2010 2512 Resistance Range Characteristic 1206 2010 2512 10W to 1MW 0.5%, 5%, 1% 1W to 10MW 1%, 5% 1W to 10MW 1%, 5% Resistance Range Resistance Range 10W to 1MW 0.5%, 5%, 1% 150C Power Rating 200mW 500mW 750mW 10W to 1MW 0.5%, 5%, 1% 150C Power Rating 200mW 500mW 750mW 150C Power Rating 200mW 500mW 750mW Max Voltage Rating 200V 400V 500V Max Voltage Rating 200V 400V 500V Max Voltage Rating 200V 400V 500V Absolute TCR 100ppm/C Absolute TCR 100ppm/C Absolute TCR 100ppm/C Operating Temperature Operating Temperature -55-55C to C to +200+200CC Operating Temperature -55C to +200C 1 2 2 2 Pad/Trace Area 80mm 200mm 300mm 1 2 2 2 1 2 2 2 Pad/Trace AreaPad/Trace Area 80mm80mm 200mm200mm 300mm 300mm Termination Wrap-around Pb-free with leach resistant Ni barrier Termination Wrap-around Pb-free with leach resistant Ni barrier Termination Wrap-around Pb-free with leach resistant Ni barrier 1 Note : Recommended minimum pad and adjacent trace area for each termination for rated power on FR4 PCB. 1 Note : Recommended minimum pad and adjacent trace area for each termination for rated power on FR4 PCB. 1 Note : Recommended minimum pad and adjacent trace area for each termination for rated power on FR4 PCB. Environmental Data Environmental Data Environmental Data Specification Specification Test Method Test Method 2 Maximum2 Typical Maximum Typical Specification MIL-STD-202 Method 108 Test MIL-STD-202 Method 108Method Load Life 1.00% 0.25% Load Life 1.00% 0.25% 2 (Rated Power for 1000hrs 150C) Maximum Typical (Rated Power for 1000hrs 150C) High Temperature Exposure 1000 hours 200C 1.00% 0.20% High Temperature Exposure 1000 hours 200C 1.00% 0.20% MIL-STD-202 Method 108 1.00% 0.25% Load Life MIL-PRF-55342H MIL-PRF-55342H (Rated Power for 1000hrs 150C) Short Time Overload 1.00% 0.10% Short Time Overload 1.00% 0.10% (6.25X rated power for 5secs) (6.25X rated power for 5secs) High Temperature Exposure 1000 hours 200C 1.00% 0.20% Moisture Resistance MIL-STD-202 Method 106G 1.00% 0.25% Moisture Resistance MIL-STD-202 Method 106G 1.00% 0.25% MIL-PRF-55342H Thermal Shock MIL-STD-202 Method 107G Condition B 0.25% 0.05% Thermal Shock MIL-STD-202 Method 107G Condition B 0.25% 0.05% Short Time Overload 1.00% 0.10% (6.25X rated power for 5secs) Resistance to Soldering Heat MIL-STD-202 Method 210F 0.25% 0.05% Resistance to Soldering Heat MIL-STD-202 Method 210F 0.25% 0.05% Moisture Resistance MIL-STD-202 Method 106G 1.00% 0.25% MIL-STD-202 Method 208 MIL-STD-202 Method 208 Solderability >95% Coverage Solderability >95% Coverage (245C, 5 seconds) (245C, 5 seconds) Thermal Shock MIL-STD-202 Method 107G Condition B 0.25% 0.05% 2 2 Note : 0.01W added for all resistance values <10W. Note : 0.01W added for all resistance values <10W. Resistance to Soldering Heat MIL-STD-202 Method 210F 0.25% 0.05% General Note General Note IRC reserves the right to make changes in product specification without notice or liability. IRC reserves the right to make changes in product specification without notice or liability. MIL-STD-202 Method 208 All information is subject to IRCs own data and is considered accurate at time of going to print. All information is subject to IRCGeneral Note s own data and is considered accurate at time of going to print. A subsidiary of BI Technologies IRC W A subsidiary ofelwyn Solderability >95% Coverage TT Electronics reserves the right to make changes in product specification without notice or liability. TTelectronics plc TTelectronics plc Advanced Film Division 4222 South Staples Street Corpus Christi T(245Cexas 78411 USA, 5 seconds) Advanced Film Division 4222 South Staples Street Corpus Christi Texas 78411 USA All information is subject to TT Electronics own data and is considered accurate at time of going to print. HTC Series Issue July 2009 TTelephone: 361 992 7900 Felephone: 361 992 7900 Facsimile: 361 992 3377 Wacsimile: 361 992 3377 Website: wwwebsite: www.irctt.com.irctt.com HTC Series Issue July 2009 www.ttelectronics.com/resistors 2 Note : 0.01W added for all resistance values <10W. TT Electronics plc 06.18 General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRCs own data and is considered accurate at time of going to print. A subsidiary of TTelectronics plc Advanced Film Division 4222 South Staples Street Corpus Christi Texas 78411 USA HTC Series Issue July 2009 Telephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.comHigh Temperature High Temperature High Temperature Thick Film Chip Resistors Thick Film Chip Resistors Thick Film Chip Resistors HTC Series Physical Data Physical Data L Protective Overcoat Overglaze L Protective Overcoat Overglaze (Stability Enhancer) C Sn Plating A (Stability Enhancer) C Sn Plating A Ni Barrier Layer Ni Barrier Layer W W High Reliability High Reliability Resistance Element T Resistance Element T B B Alumina Substrate Alumina Substrate Conductor Conductor Part Type L (mm) W (mm) T max (mm) A (mm) B min (mm) C (mm) Weight (grams) Part Type L (mm) W (mm) T max (mm) A (mm) B min (mm) C (mm) Weight (grams) 1206 3.20.4 1.60.2 0.7 0.40.15 0.40.2 1.7 0.020 1206 3.20.4 1.60.2 0.7 0.40.15 0.40.2 1.7 0.020 2010 5.10.3 2.50.2 0.8 0.60.25 0.60.3 3.0 0.036 2010 5.10.3 2.50.2 0.8 0.60.25 0.60.3 3.0 0.036 2512 6.50.3 3.20.2 0.8 0.60.25 0.60.3 4.4 0.055 2512 6.50.3 3.20.2 0.8 0.60.25 0.60.3 4.4 0.055 Construction: Construction: Thick film resistor material, overglaze and organic protection are screen printed on a 96% alumina substrate. Wrap-around Thick film resistor material, overglaze and organic protection are screen printed on a 96% alumina substrate. Wrap-around terminations have an electroplated Ni barrier and pure Sn matte finish, ensuring excellent leach resistance properties and terminations have an electroplated Ni barrier and pure Sn matte finish, ensuring excellent leach resistance properties and solderability. solderability. Marking: Marking: Components are not marked. Reels are marked with type, value, tolerance, date code and quantity. Components are not marked. Reels are marked with type, value, tolerance, date code and quantity. Solvent resistance: Solvent resistance: The body protection is resistant to all normal industrial cleaning solvents suitable for printed circuits. The body protection is resistant to all normal industrial cleaning solvents suitable for printed circuits. Power Derating Data Ordering Data Power Derating Data Ordering Data Prefix TKC - HTC - 2512LF - 100R - F Prefix TKC - HTC - 2512LF - 100R - F 100 100 Chip Type Chip Type HTC (High Temperature Chip) HTC (High Temperature Chip) Chip Size and Termination Chip Size and Termination 1206LF = 100% Tin (pb-free) termination 1206LF = 100% Tin (pb-free) termination 2010LF = 100% Tin (pb-free) termination 50 2010LF = 100% Tin (pb-free) termination 2512LF = 100% Tin (pb-free) termination 50 2512LF = 100% Tin (pb-free) termination Resistance Value (4 Digit Code) Resistance Value (4 Digit Code) Ex. 1R00 = 1W 100R = 100W 10K0 =10KW 1M50 = 1.5MW Ex. 1R00 = 1W 100R = 100W 10K0 =10KW 1M50 = 1.5MW 10 Tolerance Code 10 Tolerance Code J = 5% F = 1% D = 0.5% J = 5% F = 1% D = 0.5% 150 200 150 200 For additional information or to discuss your specific requirements, Temperature in C For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. Temperature in C please contact our Applications Team using the contact details below. Advanced Film Division 4222 South Staples Street Corpus Christi Texas 78411 USA Advanced Film Division 4222 South Staples Street Corpus Christi Texas 78411 USA HTC Series Issue July 2009 Telephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com HTC Series Issue July 2009 Telephone: 361 992 7900 Facsimile: 361 992 3377 Website: www.irctt.com General Note BI Technologies IRC Welwyn TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics own data and is considered accurate at time of going to print. www.ttelectronics.com/resistors TT Electronics plc 06.18 % Of Rated % Of Rated PPowowerer