Hermetic Infrared Diode OP130 Series Features: TO-46 hermetically sealed package Focused and non-focused optical light pattern W Enhanced temperature range Mechanically and spectrally matched to other OPTEK devices Choice of power ranges Choice of narrow or wide irradiance pattern Description: Each OP130 series device is a 935 nm gallium arsenide (GaAs) infrared LED mounted in a hermetically sealed TO -46 package that provides an enhanced temperature range with a variety of power ranges The TO-46 housing also oeff rs high power dissipation and superior protection for hostile environments. Each OP130 device has a narrow beam with an inclusive angle at half power points of 18. Each OP130W series device has a broad irradiance pattern of 50 at half power points, providing relatively even illumination over a large area. These devices are designed to efficiently operate with OP800, OP593, OP598 and OP599 phototransistors or the OP830 photodarlington. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: Output Power Lead Non-contact reflective object sensor Part LED Peak Lens Total Beam 2 (mW/cm ) Length Assembly line automation Number Wavelength Type Angle Min / Max (Min) Machine automation OP130 1.0 / NA Machine safety OP131 3.0 / NA End of travel sensor Dome 18 OP132 4.0 / NA 935 nm 0.50 OP133 5.0 / NA OP130W 1.0 / NA Flat 50 OP133W 5.0 / NA RoHS General Note TT Electronics OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is sensors ttelectronics.com www.ttelectronics.com considered accurate at time of going to print. Issue D 04/2019 Page 1 TT electronics plc Hermetic Infrared Diode OP130 Series Electrical Specifications OP130, OP131, OP132, OP133 Anode Cathode MILLIMETERS DIMENSIONS ARE IN: INCHES OP130W and OP133W Anode Cathode MILLIMETERS Pin LED DIMENSIONS ARE IN: INCHES 1 Anode 2 Cathode General Note TT Electronics OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is sensors ttelectronics.com www.ttelectronics.com considered accurate at time of going to print. Issue D 04/2019 Page 2 TT electronics plc