OP165W TT Electronics

Plastic Infrared Emitting Diode OP165, OP166 Series Features: T-1 (3 mm) package style Choice of narrow or wide irradiance pattern Choice of dome lens or flat lens Mechanically and spectrally matched to other OPTEK devices Higher power output than GaAs at equivalent drive currents 935 nm diode Description: Each device in the OP165 and OP166 series is a high intensity gallium arsenide infrared emitting diode (GaAs) that is molded in an IR transmissive clear epoxy package with either a dome or flat lens. Devices feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T -1 package style makes these devices ideal for space-limited applications. OP165 and OP166 devices are mechanically and spectrally matched to the OP505 and OP535 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: Space-limited applications Applications requiring coupling efficiency Battery -operated or voltage-limited applications Ordering Information 2 Part LED Peak Output Power (mW/cm ) I (mA) Total Beam Lead F Number Wavelength Min / Max Typ / Max Angle Length OP165A 1.95 / NA OP165B 1.40 / 2.20 18 OP165C 0.85 / 1.60 OP165D 0.28 / NA 935 nm 20 / 50 0.50 OP165W 0.50 / NA 90 OP166A 1.95 / NA 18 OP166B 1.40 / 2.20 OP166W 0.50 / NA 90 RoHS General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev D 05/2020 Page 1 TT electronics plc Form 500-1080-001 Rev - 06/2019 Plastic Infrared Emitting Diode OP165, OP166 Series OP165 (A, B, C, D) OP165W MILLIMETERS DIMENSIONS ARE IN: INCHES OP166W OP166 (A, B) 1 2 Pin LED 1 Cathode 2 Anode CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK S molded plastics. General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev D 05/2020 Page 2 TT electronics plc Form 500-1080-001 Rev - 06/2019