Hermetic Infrared Emitting Diode OP215, OP216 Features: Hermetically sealed package OP216 Mechanically and spectrally matched to other OPTEK devices Designed for direct mount to PCBoard Enhanced temperature range OP215 Excellent coupling efficiency Description: Each OP215 and OP216 device is an 890 nm gallium aluminum arsenide infrared emitting diode (GaAIAs), mounted in a hermetically sealed pig tale package with an enhanced temperature range and a narrow irradiance pattern that provides high on-axis intensity for excellent coupling efficiency. These devices offer significantly higher power output than GaAs at equivalent drive currents and have a wavelength that is matched to silicons peak response. Their small package size permits high device density mounting. The OP216 series devices provide an additional mounting tab connected to the Cathode/Case. All these LEDs are mechanically and spectrally matched to the OP300 series, OP516, OP600 series and OP640 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data, and to Application Bulletin 202 for pill-type soldering to PCBoard. Ordering Information Applications: Part LED Peak Optical Power Total Beam Non-contact reflective object sensor 2 Number Wavelength mW/cm (Min) Angle Assembly line automation OP215A OP216A 1.20 Machine automation OP215B OP216B 0.60 890 mm 24 Machine safety OP215C OP216C 0.30 End of travel sensor OP215D OP216D 0.20 Door sensor 1 Pin LED 1 Anode 2 Cathode 2 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A 06/08 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Hermetic Infrared Emitting Diode OP215, OP216 Absolute Maximum Ratings (T =25C unless otherwise noted) A o o Storage Temperature Range -65 C to +150 C o o Operating Temperature Range -65 C to +125 C Reverse Voltage 2.0 V Continuous Forward Current 100 mA Peak Forward Current (2s pulse with 0.1% duty cycle) 1.0 A (1)(2) Lead Soldering Temperature 1/16 inch (1.6 mm) from case for 5 seconds with soldering iron 260 C (3) Power Dissipation 150 mW Electrical Characteristics (T = 25C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode Apertured Radiant Incidence OP216A 1.20 (3) 2 (4) E OP216B 0.60 - - mW/cm I = 50 mA E (APT) F OP216C 0.30 OP216D 0.20 V Forward Voltage - - 1.80 V I = 50 mA F F I Reverse Current - - 100 A V = 2.0 V R R Wavelength at Peak Emission - 890 - nm I = 10 mA P F Spectral Bandwidth between B - 80 - nm I = 10 mA F Half Power Points / T Spectral Shift with Temperature - +0.18 - nm/C I = Constant P F Emission Angle at Half Power Points 24 Degree I = 50 mA HP F - - t Output Rise Time - 500 - ns r I =100 mA, PW=10 s, and F(PK) D.C.=10.0% t Output Fall Time - 250 - ns f Notes: 1. Refer to Application Bulletin 202 which reviews proper soldering techniques for pill-type devices. 2. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 3. Derate linearly 1.50 mW/ C above 25 C. is a measurement using a 0.180 (4.57 mm) diameter apertured sensor placed 0.653 (16.59 mm) from the lens 4. For OP216, E E(APT) tip. E is not necessarily uniform within the measured area. E(APT) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 06/08 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 3 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com