OP572 TT Electronics

Silicon Phototransistor OP570 Series OP570 Features: SMD plastic package OP573 High photo sensitivity OP571 Fast response time Choice of four lead configurations OP572 IR transmissive plastic package Description: Each device in this series is an NPN silicon phototransistor mounted in an opaque plastic SMD package, with an integral molded lens that enables a narrow acceptance angle and a higher collector current than devices without a lense. The OP570 series has four lead configurations and is compatible with most automated mounting equipment. The OP570 series is mechanically and spectrally matched to the OP270 series infrared LEDs. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: Ordering Information Non-contact position sensing Viewing Lead Part Number Sensor Datum detection Angle Length Machine automation OP570 Axial Optical encoders OP571 Gull Wing Phototransistor 25 IrDA OP572 Yoke OP573 Rev. Gull Reflective and transmissive sensors OP570 OP571 OP571 OP572 1 OP573 Pin Transistor 1 Collector 2 Emitter 2 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue 1.1 02/07 Phone: (800) 341-4747 FAX: (972) 323 2396 sensors optekinc.com www.optekinc.com Page 1 of 3 Silicon Phototransistor OP570 Series OP573 OP570 MILLIMETERS DIMENSIONS ARE IN: INCHES TOLERANCE IS .0039 0.1 OP571 OP572 Pin Transistor 2 1 Collector 2 Emitter OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue 1.2 02/07 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com 1