Photologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 Features: Choice of four output options in low-cost side-looking package Choice of two sensitivity options (OPL560/561/562/563) Product Photo Here High noise immunity Direct TTL/LSTTL CMOS interface Data rates to 250 kBaud for all except OPL560 series (200 kBaud) Low power consumption Description: All components in this series include a photodiode, amplifier, voltage regulator, Schmitt trigger and NPN output transistor on a single silicon chip. OPL560 chips also include a voltage regulator on the chip. All devices in the series have a Photologic chip that is encapsulated in a molded plastic side-looking package with an integral lens (recessed integral lens for OPL535 and OPL536). This packaging provides enhanced optical coupling, combined with mechanical protection. The hysteresis characteristics of the Schmitt trigger on each device offers high immunity to noise on input and V . CC OPL530, OPL531, OPL535 and OPL536 include a 10 K pull-up resistor (R ) from output to V . These L CC components exhibit very stable performance over supply voltages ranging from 4.5 V to 16 V and a wide range of irradiance levels. OPL550 and OPL551 devices feature TTL/LSTTL compatible logic level output which can drive up to 8 TTL loads without additional circuitry and medium-speed data rates to 250 kBaud, with typical rise and fall times of 25 nanoseconds. OPL560, OPL561, OPL562 and OPL563 devices feature TTL/LSTTL compatible logic level output which can drive up to 10 TTL loads over supply voltages ranging from 4.5 V to 16 V. OPL530, OPL531, OPL550, OPL551, OPL560, OPL561, OPL562 and OPL563 are mechanically and spectrally matched to OP140 and OP240 LEDs. OPL535 and OPL536 are mechanically and spectrally matched to OP145 and OP245 series LEDs. Applications: Input Power Range 2 (mW/cm ) Min/Max Non-contact reflective Base Part Number Package Output Type - with Light object sensor - A B Assembly line automation OPL530 Internal 10K - High Machine automation External Lens Machine safety OPL531 Internal 10K - Low 0.08/0.40 0.08/0.25 0.20/0.40 End of travel sensor OPL535 Internal 10K - High Recessed Door sensor Lens OPL536 Internal 10K - Low OPL550 Totem Pole - High 0.25/2.4 0.25/1.4 N/A OPL551 Totem Pole - Low 0.25/2.5 0.25/1.5 OPL560 Totem Pole - High External 0.09/0.55 0.09/0.36 0.18/0.55 Lens OPL561 Totem Pole - Low OPL562 Totem Pole - High 0.025/0.23 0.025/0.14 0.07/0.23 OPL563 Totem Pole - Low OC = Open Collector Output OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 10/14 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 8 Photologic Sensor OPL530, OPL531, OPL535, OPL536, OPL550, OPL551, OPL560, OPL561, OPL562, OPL563 OPL530, OPL550, OPL560 Series MILLIMETERS DIMENSIONS ARE IN: INCHES Pin Sensor 1 Ground 2 Output 3 V CC OPL535, OPL536 Series MILLIMETERS DIMENSIONS ARE IN: INCHES Pin Sensor 1 Ground 2 Output 3 V CC OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 10/14 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com