OPB121B TT Electronics

OPB120A, OPB120B, OPB121B, OPB122B Features: Choice of output configuration Printed circuit board mounting Opaque plastic housing Low profile 0.080 (2.03 mm) wide slot 0.275 (6.99 mm) lead spacing Description: The OPB120 through OPB123 devices consist of an infrared emitting diode and a Photologic sensor (which is a monolithic integrated circuit that incorporates a linear amplifier and a Schmitt Trigger). The OPB120 series have an LED and Photologic sensor mounted on opposite sides of a 0.080 (2.03 mm) wide gap of an opaque housing. The OPB12 A series have a molded 0.040 (1.02 mm) wide apertures located over both the emitter and the Photologic sensor. The OPB12 B seriesseries have a molded 0.040 (1.016 mm) wide apertures located over the emitter and 0.010 (0.254 mm) over the Photologic sensor. All devices in this series have the added stability utilizing hysteresis built into the amplification circuitry. The electrical output can be specified as either buffered Totem -Pole (OPB 120A, OPB120B), bueff red Open -Collector (OPB121B), and Inverted Totem-Pole (OPB122B). Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: Aperture Sensor Mechanical switch Part Number Emiett r/Sensor Photologic replacement OPB120A 0.04 / 0.04 Speed indication Totem-Pole OPB120B 0.04 / 0.01 (tachometer) OPB121B Open-Collector 0.04 / 0.01 Mechanical limit Inverted Totem- indication OPB122B 0.04 / 0.01 Pole Edge sensing Object sensing Pin Description 1 Cathode 2 Anode 3 V CC 4 Output 5 Ground MILLIMETERS DIMENSIONS ARE IN: INCHES Ro HS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue C 09/2016 Page 1 TT electronics plc OPB120A, OPB120B, OPB121B, OPB122B OPB120 Buffered Totem-Pole OPB121 Buffered Open-Collector V CC V CC OUT OUT GND GND OPB122 Inverted Totem-Pole OPB123 Inverted Open-Collector V CC V CC OUT OUT GND GND General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.optekinc.com www.ttelectronics.com considered accurate at time of going to print. Issue C 09/2016 Page 2 TT electronics plc