OPB810W55Z TT Electronics

Wide Gap Slotted Optical Switch OPB800 & OPB810 (L and W Series) W Package Features: 0.375 (9.525 mm) wide gap Choice of aperture size Product Photo Here Choice of minimum photocurrent Choice of opaque or IR transmissive shells L Package Available for PCBoard mounting or with 24 26 AWG wires Description: The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a standard product line, while the OPB800W series, remote mounted, switch offers 24 (610 mm) 26 AWG wire interconnect. Building from a standard housing that utilizes a 0.375 (9.5 mm) wide slot, a user can specify the electrical output parameters, discrete shell material and the aperture width. Housings are made from an opaque grade of injection-molded plastic that minimizes the assemblys sensitivity to visible and near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device throat, are made of IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture openings (for maximum protection against ambient light). Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Non-contact interruptive object sensing Assembly line automation Machine automation Equipment security Part Number Guide Machine safety OPB 8 X X X X X Z For W series only Optek Assembly Sensor Aperture: 1 0.010 (.254 mm) 5 0.050 (1.270 mm) Phototransistor Output Family Emitter Aperture: 5 0.050 (1.270 mm) Discrete Shell Material: Mounting configurations: 0 Transmissive plastic L Solder lead termination Discrete shell W Wire termination Electrical Specification Variations: 1 Opaque plastic 0 = Electrical Parameter A Discrete shell 1 = Electrical Parameter B 2 = Electrical Parameter C Note: Assemblies with 0.010 apertures are currently available with electrical parameter A only. Wires = 26AWG24 Long OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue B 02/2013 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 5 Wide Gap Slotted Optical Switch OPB800 & OPB810 (L and W Series) Absolute Maximum Ratings (T =25C unless otherwise noted) A Storage and Operating Temperature L Series -40 C to +85 C W Series -40 C to +80 C (2) Lead Soldering Temperature 1/16 inch (1.6mm) from the case for 5 sec. with soldering iron 260 C Input Diode Forward DC Current 50 mA Peak Forward Current (1 s pulse width, 300 pps) 3 A Reverse DC Voltage 2 V (1) Power Dissipation 100 mW Output Phototransistor Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V Collector DC Current 30 mA (1) Power Dissipation 100 mW 1 3 Color/Pin Description Red-1 Anode Black-2 Cathode 2 4 White-3 Collector Green-4 Emitter Wired (W) Version MILLIMETERS DIMENSIONS ARE IN: INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue B 02/2013 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 5 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com