OPB910W55Z TT Electronics

Photologic Slotted Optical Switch Wide Gap Series L Series OPB900 through OPB913 Series (L, W Z) Features: W Series 0.375 (9.5 mm) wide gap Choice of logical output configurations Choice of opaque or IR transmissive housing material Choice of PCBoard or 26 AWG, UL rated wire Data rates to 250 kBaud Description: The OPB900 - OPB913 series of Photologic Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.375 (9.5mm) wide slot, a user can specify the type and polarity of the TTL output and the type of shell material. Electrical output can be specified as either TTL Totem Pole (bueff red) or TTL Open Collector, either of which can be supplied with an inverted output polarity. All versions have the added stability of hysteresis built into the amplification circuitry. Part Number Guide OPB900 Series (L, W) Applications: OPB9 Mechanical switch replacement L55 = Solder lead termination (PCBoard mount) 0 = Dust protection with apertures Speed indication (tachometer) 1 = Open apertured or Mechanical limit indication W5 Z= 26 AWG wire termination (24 61cm long) 0 = Totem Pole Edge sensing 1 = Open Collector Aperture sizes: 2 = Inverted Totem Pole 1 = 0.010 (0.25 mm) Object sensing 3 = Inverted Open Collector 5 = 0.050 (1.27 mm) TotToemtem P-Pole-oleOu Otpuutt put OpenOp Coellen-Collecctor Otorutp-Ouut tput Inverted Totem-PoleInve rted Output SeriInesverted Open Collector RoHS General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue A 09/2016 Page 1 TT electronics plc Photologic Slotted Optical Switch Wide Gap Series OPB900 through OPB913 Series (L, W Z) Electrical Specifications MILLIMETERS DIMENSIONS ARE IN: INCHES Color-Pin Description Color-Pin Description Color-Pin Description Color-Pin Description Color-Pin Description Red-1 Anode Black-2 Cathode White-3 V Blue-4 Output Green-5 Ground CC Absolute Maximum Ratings (T = -40C to + 70 Unless otherwise noted) A Storage Temperature -40 C to +85 C Operating Temperature -40 C to +70 C (1) Lead Soldering Temperature (1/16 (1.6 mm) from case for 5 seconds with soldering iron) 260 C Input Infrared LED DC Forward Diode (LED) Current 40 mA DC Reverse Diode (LED) Voltage 2 V (1) Input Diode Power Dissipation 100 mW Output Photologic Supply Voltage, V (not to exceed 3 seconds) 10V CC Voltage at Output Lead (Open Collector Output version) 35 V (2) Output Photologic Power Dissipation 200 mW (3) Total Device Power Dissipation 300 mW Notes: (1) Derate linearly 2.22 mW/C above 25C (2) Derate linearly 4.44 mW/C above 25C (3) Derate linearly 6.66 mW/C above 25C (4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when ofl w soldering. (5) Methanol or isopropanol are recommended as cleaning agents. The plascti housing is soluble in chlorinated hydrocarbons and k eytones. General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue A 09/2016 Page 2 TT electronics plc