OPF430 TT Electronics

Fiber Optic Detector OPF430 Features: Electrically isolated metal can package High speed, low capacitance Metal can for improved noise immunity 100MHz operation minimum Description: The OPF430 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800 -1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF430 is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra system fiber optic links Video surveillance systems MILLIMETERS DIMENSIONS ARE IN: RoHS INCHES General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev E 09/2020 Page 1 TT electronics plc Fiber Optic Detector OPF430 Electrical Specifications Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -65 C to +150 C Operating Temperature Range -55 C to +125 C (1) Lead Soldering Temperature 260 C (2) Continuous Power Dissipation 200 mW Maximum Reverse Voltage 100 VDC Electrical Characteristics (T = 25 C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS R Responsivity 0.45 0.55 A/W V = 5.0 V 50/125 m fiber = 850 nm R I Dark Current 0.1 5.0 nA V = 5.0 V D R Peak Response Wavelength 905 nm p t Output Rise Time 2.0 ns V = 5 V R = 50 , 10%-90% r R L C Total Capacitance 1.5 2.0 pF V = 5 V T R FoV Field of View 80 deg Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended . 2. De-rate linearly at 1.60 mW/C above 25 C . General Note TT Electronics OPTEK Technology TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006 Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Rev E 09/2020 Page 2 TT electronics plc