4-Pin LED Lamp (7.6 mm) OVFSxxC8 Packaged in tubes Compatible with automatic placement equipment Product Photo Here Compatible with infrared and vapor phase reflow solder process Mono-colors Pb-free The OVFSxxC8 series is designed with higher forward voltage to maximize brightness and incorporates a low- profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines. Applications Illumination for signs and channel letters Automotive: Rear stop/turn signal lamps/truck marker lamps Traffic signals, pedestrian and walkway Mood-setting decoration and landscape lighting signs Special decorative interior/exterior lighting Special effects stage lighting Part Number DIM A Beam Angle Material Emitted Color Flux Typ. mlm Lens Color 1.50 100 AllnGaP Amber 8000 Clear OVFSAAC8 .059 1.29 70 InGaN Blue 2500 Clear OVFSB7C8 .051 1.29 70 InGaN Green 8500 Clear OVFSG7C8 .051 1.50 100 AllnGaP Red 8000 Clear OVFSRAC8 .059 1.90 60 InGaN White 7000 Clear OVFSW6C8 .075 RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue C 09/2012 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 1 of 8 4-Pin LED Lamp OVFSxxC8 o Absolute Maximum Ratings T = 25 C unless otherwise noted A -40 ~ +100 C Storage Temperature Range Blue, Green, Red, Amber, White Blue, Green, Red, Amber -40 ~ +100 C Operating Temperature Range -40 ~ +95 C White 5 V Reverse Voltage Blue, Green, White 35 mA Continuous Forward Current Red, Amber 70 mA Blue, Green, White 100 mA Peak Forward Current (10% Duty Cycle, 1 kHz) Red, Amber 200 mA Blue, Green, White 154 mW Power Dissipation Red, Amber 210 mW Lead Soldering Temperature (3mm from the base of the epoxy bulb) 260 C / 3 sec max Electrostatic Discharge Classification (JEDE-JESD22-A114F) Class 2 Optical and Electrical Characteristics (T = 25 C) A PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS SYMBOL Blue 1650 2500 ---- 5500 8500 ---- Green I = 30 mA F 3850 7000 ---- Luminous Flux White v mlm Red 5500 8000 ---- I = 70 mA F Amber 6600 8000 ---- Blue & Green ---- 3.6 4.4 I = 30 mA F V Forward Voltage V F White ---- 3.6 4.4 Red, Amber ---- 2.5 3.0 I = 70 mA F Blue & Green I Reverse Current White ---- ---- 100 A V = 5 V R R Red, Amber Blue 460 470 475 I = 30 mA F Green 515 527 535 Dominant Wavelength nm D Red 620 628 637 I = 70 mA F 584 591 599 Amber 0.2895 x Chromaticity Coordinates White I = 30 mA F 0.2905 y Blue & Green ---- 70 ---- I = 30 mA F 2H-H 50% Power Angle White ---- 60 ---- deg ---- 100 ---- I = 70 mA Red, Amber F OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 09/2012 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 8 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com