Round Through-Hole LED Lamp (5 mm) OVLFx3C7 Features: High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens 30 Beam Angle Description: Each device in the OVLFx3C7 series is a high-intensity LED mounted in a clear plastic T -1 package. The LED provides a well- defined and even emission pattern. The UV -resistant epoxy lens makes this device an optimal solution for outdoor applications. Applications: Traffic and pedestrian signals Signage and architectural lighting Backlighting Automotive Part Number Material Emitted Color Intensity Typ. mcd Lens Color InGaN Blue 5,200 Clear OVLFB3C7 InGaN Green 16,000 Clear OVLFG3C7 AllnGaP Red 7,400 Clear OVLFR3C7 AllnGaP Yellow 7,400 Clear OVLFY3C7 RoHS DO NOT LOOK DIRECTLY Leadframe material is iron alloy with nti -plated leads AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY General Note TT Electronics Optek Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue C 08/2017 Page 1 TT electronics plc Round Through-Hole LED Lamp (5 mm) OVLFx3C7 Electrical Specicatifi ons Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -40 ~ +100 C Operating Temperature Range -40 ~ +100 C Reverse Voltage 5 V Continuous Forward Current Blue, Green 25 mA Continuous Forward Current 50 mA Red, Yellow Peak Forward Current (10% Duty Cycle, 1 kHz) Blue, Green 100 mA Peak Forward Current (10% Duty Cycle, 1 kHz) 100 mA Red, Yellow Power Dissipation Blue, Green 100 mW Power Dissipation 120 mW Red, Yellow Blue, Green -0.29 mA/ C Current Linearity vs Ambient Temperature -0.72 mA/ C Current Linearity vs Ambient Temperature Red, Yellow Electrostatic Discharge Classification (JEDEC -JESD22-A114F) Class 1C 125 C LED Junction Temperature Lead Soldering Temperature (4 mm from the base of the epoxy bulb) 260 C / 5 seconds Electrical Characteristics SYMBOL PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS Blue 3,115 5,200 ---- Green 8,550 16,000 ---- I Luminous Intensity mcd I = 20 mA V F Red 4,360 7,400 ---- Yellow 4,360 7,400 ---- Blue 2.6 3.4 4.0 Green V Forward Voltage V I = 20 mA F F Red 1.8 2.0 2.4 Yellow Blue Green I Reverse Current ---- ---- 10 A V = 5 V R R Red Yellow Blue 460 470 475 Green 519 525 531 Dominant Wavelength nm I = 20 mA D F Red 620 623 630 Yellow 585 589 595 Blue Green Spectra Half Width ---- 25 ---- nm I = 20 mA F Red Yellow 2H-H 50% Power Angle ---- 30 ---- deg I = 20 mA F General Note TT Electronics Optek Technology, Inc. TT Electronics reserves the right to make changes in product specificaoti n without 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 Ph: +1 972 323 2200 nocti e or liability. All informaoti n is subject to TT Electronics own data and is www.ttelectronics.com sensors ttelectronics.com considered accurate at time of going to print. Issue C 08/2017 Page 2 TT electronics plc