High-Intensity LED in Plastic OPTEK Tec hnology T-1 Package OVLG Series x Narrow beam angle x High brightness LED Product Photo Here x Water clear plastic package x UV resistant epoxy Each device in the OVLG Series is a high intensity LED mounted in a clear plastic T-1 package. Each device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, these LEDs are useful in applications that require a higher on-axis brightness than that achievable with standard lamps. Applications x Indoor/outdoor applications x Variable message boards x Store front signage x Indicators Part Number Material Emitted Color Intensity Typ. mcd Lens Color Blue 3800 OVLGB0C6B9 InGaN Blue-Green 9800 OVLGC0C6B9 Water Clear Red 8550 OVLGS0C8B9 AlInGaP Yellow 10300 OVLGY0C9B9 AlInGap Package InGaN Package Red, Yellow Blue, Blue-Green 0 0 1 ANODE 2 CATHODE DIMENSIONS ARE IN INCHES AND MILLIMETERS Beam Pattern Moisture RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A .1 07/07 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 1 of 10 T-1 High-Intensity LED OVLG Series OPTEK Tec hnology Absolute Maximum Ratings o T = 25 C A Parameter Red, Yellow Blue, Blue-Green DC Forward Current 30mA 20mA 1 Peak Pulsed Forward Current 100mA 50mA Power Dissipation 72mW 80mW Current Linearity vs Ambient Temperature -0.5mA/C -0.2mA/C Junction Temperature 125C Reverse Voltage 5V Storage Temperature Range -40 ~ +100 C Operating Temperature Range -40 ~ +85 C 2 Soldering Temperature 260/5 seconds Note: 1. Duty Ratio = 1/10, Pulse Width = 0.1ms 2. 4mm (.157) away from epoxy Electrical and Optical Characteristics Blue o T = 25 C A SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS I Luminous Intensity 2225 3800 6105 mcd I = 20 mA v F V Forward Voltage 2.6 3.4 4.0 V I = 20 mA F F I Reverse Current ---- ---- 50 A V = 5 V R R Dominant Wavelength 460 465 475 nm I = 20 mA D F Spectral Half Width ---- 25 ---- nm I = 20 mA F 2 H-H 50% Power Angle ---- 6 ---- deg I = 20 mA F Electrical and Optical Characteristics Blue-Green o T = 25 C A SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS I Luminous Intensity 6105 9800 16758 mcd I = 20 mA v F V Forward Voltage 2.6 3.4 4.0 V I = 20 mA F F I Reverse Current ---- ---- 50 A V = 5 V R R Dominant Wavelength 499 505 511 nm I = 20 mA D F Spectral Half Width ---- 25 ---- nm I = 20 mA F 2 H-H 50% Power Angle ---- 6 ---- deg I = 20 mA F Issue A .1 07/07 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com