Hi-Reliability Visible LED Lamp (TO46) OVM4x, OVM4xTX, OVM4xTXV Hermetically sealed TO-46 package Choice of blue, green, red or yellow Product Photo Here High-brightness with well-defined spatial radiation patterns ESD protection built in Each OVM4x, OVM4xTX and OVM4xTXV device is a high-reliability, high-sensitivity visible LED that is mounted in a hermetically sealed TO-46 package. Hi-Reliability Visible LEDs function in the abnormally severe levels of mechanical, environmental and electrical stress that are typical of military and harsh industrial applications. OVM4xTX and OVM4xTXV devices are processed to OPTEKs 100% screening and QCI program-patterned after MIL-PRF-19500. Group A and B are performed on every lot. Group C is performed every six months. Applications Automotive exterior and interior lighting Architectural lighting Electronic signs and signals Intensity Typ. Part Number Part Number Material Emitted Color Lens Color (mcd) InGaN Blue 2260 Clear Glass OVM4BTX OVM4BTXV InGaN Green 6520 Clear Glass OVM4GTX OVM4GTXV OVM4RTX OVM4RTXV AlInGaP Red 3300 Clear Glass AlInGaP Yellow 2010 Clear Glass OVM4YTX OVM4YTXV ANODE CATHODE (BRAZED) (ISOLATED) Pin 2 Pin 1 Pin 1 Cathode Pin 2 Anode DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. Dimensions are in inches mm RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.4 05/10 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com Page 1 of 4 Hi-Reliability Visible LED Lamp OVM4x, OVM4xTX, OVM4xTXV Absolute Maximum Ratings o T = 25 C unless otherwise noted A Storage Temperature Range -65 C to +150 C Operating Temperature Range -55 C to +100 C Reverse Voltage 5 V 2 Continuous Forward Current 100 mA Peak Forward Current (10% Duty Cycle, 1 KHz) 1.6 A Power Dissipation 370 mW 1 Lead Soldering Temperature (3mm from the case) 260 C Current Linearity vs. Ambient Temperature -0.2 mA/ C LED Junction Temperature 115 C Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Design of heat dissipation should be considered. Electrical Characteristics o T = 25 C unless otherwise noted A SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS Blue ---- 2260 ---- Green ---- 6520 ---- I mcd I = 20 mA v Luminous Intensity F Red ---- 3300 ---- Yellow ---- 2010 ---- Blue ---- 2.60 2.95 Green ---- 2.60 2.95 V Forward Voltage V I = 20 mA F F Red ---- 1.80 2.15 Yellow ---- 1.80 2.15 Blue ---- 463 ---- Green ---- 530 ---- Peak Wavelength nm I = 20 mA P F Red ---- 630 ---- Yellow ---- 591 ---- Blue 460 465 470 Green 520 530 540 Dominant Wavelength nm I = 20 mA D F Red 619 624 629 Yellow 584 589 594 Blue ---- 22 ---- Green ---- 35 ---- Spectral Half Width nm I = 20 mA F Red ---- 15 ---- Yellow ---- 18 ---- 2 ---- 18 ---- deg I = 20 mA 50% Power Angle F Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content <1000 PPM. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 05/10 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 4 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors optekinc.com www.optekinc.com