OVM12F3B7 TT Electronics

3 LED Module (30 modules / string) OVM12F3x7 Series 1 string Length: 160 inches Contains 30 modules Product Photo Here Unit Price = 1 module UL File E339817 The OVM12F3x7 is a versatile string of 30 LED modules for surface illumination creating decorative, special ef- fects or channel letter applications. Response time is fast for instantaneous flashing lights and power consumption results in low power requirements from circuit power supply. Decorative applications include boats & motorcycles, boat houses & docks, residential under counter lighting & hidden ceiling lights, safety lights around steps and pools are just a few places to create an environment for fun and emotional moods. Applications Mood-setting decoration and landscape lighting Channel Letters & Signs Special decorative interior/exterior lighting Large Area Back-lighting Special effects stage lighting High-lighting pedestrian and walkway areas Part Number Color Beam Dominant Wavelength Illumination IP Housing Wire Angle or CCT (lux 0.5m) typ Rating Material Gauge OVM12F3R7 Red 623 +/- 3 nm 20 OVM12F3Y7 Yellow 590 +/- 3 nm 18 OVM12F3G7 Green 120 525 +/- 5 nm 14 67 ABS AWG 20 OVM12F3B7 Blue 470 +/- 5 nm 6 OVM12F3W7 White 5000 to 7000 K 16 RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Issue D 05/2011 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com Page 1 of 2 3 LED Module (30 modules / string) o Absolute Maximum Ratings (T = 25 C unless otherwise noted) A Storage Temperature Range -40 ~ +80 C Operating Temperature Range -30 ~ +50 C Input Voltage 15 V Power Dissipation 1.5 W o LED Junction Temperature 125 C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Notes: 1. Lead Solder time less than 10 seconds at temperature extreme. 2. No Heat sink is required if the string is operated at ambient temperature < 35C. For long term performance the drive voltage at 12 V is recommended. Please contact an Optek sales representative for more information on recommended drive conditions. o Electrical & Mechanical Characteristics / module (T = 25 C unless otherwise noted) A SYMBOL Notes MIN TYP MAX UNITS CONDITIONS Power Red/Yellow 0.5 - - - W V = 12 V DC Consumption Green/Blue/White 0.3 V Input Voltage - - - - - - V 12 DC Net Weight - - - 16 - - - g Per module Dominant Wavelength - - - See chart D 2 50% Power Angle ---- 120 ---- deg V = 12 V DC If an entire string is not required for the application, clip wires at mid-span: Modules can be secured onto a mounting surface with two 6 screws. Modules are waterproof and can be used outdoors. The installer is responsible for waterproofing the connection to the power source. The installer is also responsible for the use of an exterior approved power source. Package Information: 1 tray contains 2 strings of 30 modules each. Modules are packaged 60 per tray. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue D 05/2011 OPTEK Technology Inc. 1645 Wallace Drive, Carrollton, Texas 75006 Page 2 of 2 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED optekinc.com www.optekinc.com