D28CC95UVPA12-VF 2800mA Programmable LED Driver Universal (120-277V) Input Voltage Class 2, 95W Constant Current Output with 0-10V dimming Full featured programmability with 12Vdc 100mA auxiliary output Performance Auxiliary Output 120 ~ 277 Vac Output Voltage 12 Vdc Input Voltage Output Current 100 mA 0.90 /120V 0.39/277V Input Current Max 108W Input Power Max Physical 50 - 60 (Hz) Input Frequency Length 5.43 in > 0.95 Power Factor* Width 3.62 in < 20 % THD max* Height 1.56 in 18V to 34V 2.80 Amps Output Voltage Mounting Length 5.16 in (Refer to Power Curve Chart) 18V to 56V 1.70 Amps Weight (lbs) 1.4 2800mA Max. Output Current Lead Lengths (+/- 1 in) Min. Dimming Current 140mA Blk, Wht, Purple, Gray 11.5 in Output Power 95W Red(+), Blue(-) 11.5 in Standby < 2.8W 120Vac Orange, Yellow/Black, Black/Wht, Blue/Wht 11.5 in Power < 3.5W 277Vac Lead-wires are 18 AWG 105C /600V solid copper. Line Regulation 3 % Environmental Load Regulation 5 % Meets FCC part 15 (Class A) Output Current Ripple <10% (Pk-Pk/avg) EMI and RFI Non-Consumer Limits Inrush Current 120V: 25A / 230uS Operating -40C to 55C Peak / >50% Duration 277V: 54A / 85uS Storage Temperature -40C to 85C * Refer to charts for additional information 85C max for warranty - Harmonic Emissions comply with ANSI C82.77 tc 90C max for UL - Inrush current complies with NEMA 410 Location Rating UL Dry & Damp, Type HL Ordering Information Transient Protection IEEE C62.41 6kV** Order Number Description Qty/Carton **Driver uses MOVs for transient protection. D28CC95UVPA12-VF010C Standard Product 10 Refer to application note EVD07 at www.unvlt.com for Protection: additional information on Hi-Pot Testing. Over Voltage, Under Voltage, Short Circuit, Over Temp Safety: UL 8750 & CSA 250.13 UL Listed Class P Application and operation performance specification information subject to change without notification. www.unvlt.com Page 1 of 9 January 10, 2018D28CC95UVPA12-VF Programmable Features Programming System Output Current EVERset Programming Software Minimum Dimming Level Software Dim-to-Off LDPC000A Hardware Dimming Curve Configuration Tool (Linear, Linear Soft Start, Logarithmic) Driver Interface Wired via 0-10V leads Lumen Maintenance *Refer to application notes EVD10 and EVD11 at www.unvlt.com for additional information on programmable features. Wiring Diagram Output Input Red (+) Line Black LED Neutral Blue (-) Module White NTC Black/White Band LED Driver Blue/White Band Orange (+) 0-10V Aux Purple Dimming Control Yellow/Black (-) Control Violet Device NOTE: Unused Black/White and Blue/White leads must be individually capped off when thermal foldback control is not used. *Refer to application note at www.unvlt.com for additional information on programming. Application and operation performance specification information subject to change without notification. www.unvlt.com Page 2 of 9 January 10, 2018