D800C33UNVSL-GB030C Universal Lighting

D800C33UNVSL-GB 800mA Selectable Output Current LED Driver 800/750/700/650mA Selectable Output Current 0-10V dimming to 5% with dim-to-off Class B EMI at 120Vac input Performance Physical 120 ~ 277 Vac Length 4.72 in (120 mm) Input Voltage Width 1.69 in (43 mm) 0.35 /120V 0.12 / 277V Input Current Max 39.4W Height 1.00 in (25.4 mm) Input Power Max Mounting Length 4.37 in (111 mm) 50 - 60 (Hz) Input Frequency w/ 1.30 in (33 mm) offset > 0.95 max load Power Factor Weight (lbs) 0.38 lbs < 20% max load THD max Lead Lengths Output Voltage 24V to 42V 5.90 in (150 mm) Blk, Wht 650/700/750/800mA Max. Output Current 18AWG / 105C / 600V Min. Dimming Current 5% of selected Iout 5.90 in (150 mm) Red(LED+), Blue(LED-) 33.6W Max. Output Power 18AWG / 105C / 300V Standby Power < 0.25W 120Vac Vio(Dim+), Gray(Dim-) 11.42 in (290 mm) < 0.75W 277Vac 22AWG / 105C / 300V Line Regulation 5 % Load Regulation 5 % Protection Over Voltage, Short Circuit, Over Temp Output Current Ripple <30% (Pk-Pk/avg) Safety: Inrush Current* 120V: 30A / 100uS UL 8750 & CSA 250.13 Peak / >50% Duration 277V: 25A / 120uS UL Class P LED Start Up Time <500mS * Source impedance per NEMA 410 Ordering Information Order Number Description Qty/Carton Environmental D800C33UNVSL-GB030C 800mA 33W 30 FCC part 15 (Class B) at 120V EMI and RFI FCC part 15 (Class A) at 277V -40C to 40C / -40F to 104F Operating Temp. Wiring Diagram: -40C to 75C / -40F to 167F Storage Temperature 75C max for warranty tc 90C max for UL Protection Rating UL Dry & Damp Transient Protection IEEE C62.41 2.5kV Application and operation performance specification information subject to change without notification. www.unvlt.com Page 1 of 6 October 9, 2018D800C33UNVSL-GB Selectable Output Current Switch 1 Switch 2 Output Current On On 800mA (default) Off On 750mA On Off 700mA Off Off 650mA 0-10V Dimming 0-10V Analog Dimming Interface Analog 0 to 10 vDC Voltage Control Control Voltage Light Output Use Violet (+) & Gray (-) for connection to 0-10vDC. 8V 100% 10v = maximum output, 0v = dim-to-off Wiring Violet & Gray together provides min. light output. 1V 5% Capping Violet & Gray separately provides 100% light output. 0.8V Turn-Off 0-10V interface can be wired as a Class 1 or Class 2 Circuit. 1V Turn-On Driver will source a maximum of 160uA for control needs. Controller must sink current from the 0-10V control leads. Application and operation performance specification information subject to change without notification. www.unvlt.com Page 2 of 6 October 9, 2018