Subracks 37 Subracks - VectorPak Subrack Types Introduction Designed in accordance with EIA standard RS-310, Vector subracks and modules offer versatility within a 19 rackmount format. All racks are adjustable in both height and depth, offering standard product solutions for stan- dard and custom requirements. All Subrack sizes are compatible with Vector prototyping boards (see Vectorbord section), and can accommodate other sizes as well. Several card guide types (metal or plastic, snap-in, rivet, or screw-down) are available. Cages VectorPak Subrack and Module Subrack Types by Part Number Stem: CCK - Card Cage frame kit. Kits with no card guides use F in number (e.g., CCK13F/90). Other kits have 21 pair of guides included: S= plastic snap-in type e.g., CCK13S/90 M or P= metal or plastic, fastened with hardware. Guide spacing is .25. CCA - Same as CCK version, but all are assembled with guides. CMA - Assembled Module Subrack for EFP modules. Modules available separately. CCM - Assembled rack for Card Mount Modules (CM type). Modules available separately. For Rack Accessories see page 41A For Desktop outer enclosure, see page 42 New Item: CCK19F/90 (For max 11.5 x 13.5 cards) Subrack Kits (CCK) Assembled Module Assembled Subracks Subracks (CMA) with Continuous Guide Plate .060 Assembled Subracks Assembled Card Mount with Card Guides (CCA) Subracks (CCM) CCK -13 -S - /90 Model Type Note: /90 denotes side walls with CCK - Kit only with snap-in card guides .200 slot width CCA - Factory assembled version of On CCA, K frames only also CCK with snap-in card guides denotes snap-in version CCM - Factory assembled card mount cage with snap-in card guides CMA - Assembled module cage with module guides Series Number (Max. Card Size) CCK Type 12 - 3U (5.25) X 19 x 9 (4.5 x 4.5) F - Frame only, snap-in plastic, 21 pair Card Guides included metal or plastic screw-down 13 - 3U (5.25) X 19 X 9 (4.5 x 6.5) card guides available separately 21 pair Card Guides included C - Continuous guide plate, 14 - 3U (5.25) X 19 X 12 (4.5 x 9.6) assembled cage only 16 - 3U (5.25) X 19 X 15.75 (4.5 x 13.5) S - Sanp-in guides included 15 - 4U (7.00) X 19 X 12 (6.25 x 9.6) M - Screw-in Aluminum card guides 20 - 4U (7.00) X 19 X 15.75 (6.25 x 13.5) P - Screw-in plastic card guides 17 - 5U (8.75) X 19 X 12 (8.00 x 11.0) 18 - 6U (10.50) X 19 X 15.75 (9.75 x 13.5) CMA 13 or 14 - XX/90 19 - 7U (12.25) X 19 X 15.75 (11.5 x 13.5) 16 - Designed for 1.6 wide EFP modules 100 -7U (12.25) X 19 X 9.00 (11.5 x 7) 20 - Designed for 2.0 wide EFP modules 30 - Designed for 3.0 wide EFP modules For Front Door Panels and Covers see page 41A 11115 Vanowen St., North Hollywood, CA 91605 Phone (818) 985-8208 Toll-Free (800) 423-5659 Web site: 38 Subracks - VectorPak Assembled Subracks with Card Guides (CCA) Assembled Cardmount Subracks (CCM) Cardmount Subracks Model CCM13S/90 Card Module Rack with assorted cardmount modules Accepts CM45A65 Card Mount Modules Card guide positions are variable at .25 increments Card Mount Modules Assembled module rack - plastic snap-in install on 1 centers Different width modules may be inserted interchangeable Part No. Height Width Length Module Card H1 H2 W L B C Rack Guide without guide changes CM45A65-1 5.25 4.5 1.0 6.57 3.8 3.6 CCM13S CG2-65 Card mount modules (CM Series) with 1 to 4 widths CM45A65-2 5.25 4.5 2.0 6.57 3.8 3.6 CCM13S CG2-65 For 3U and 4U applications CM45A65-4 5.25 4.5 4.0 6.57 3.8 3.6 CCM13S CG2-65 Adjustable rear struts for connection of backplanes CM45B95-1 5.25 4.5 1.0 9.57 3.8 6.6 CCM14S CG2-95 (struts available separately) CM45B95-2 5.25 4.5 2.0 9.57 3.8 6.6 CCM14S CG2-95 CM45B95-4 5.25 4.5 4.0 9.57 3.8 3.6 CCM14S CG2-95 .062 thick aluminum plates are inserted into guide PC Card is CM62F95-1 7.0 6.25 1.0 9.57 5.5 6.6 CCM15S CG2-95 attached firmly to plate CM62F95-2 7.0 6.25 2.0 9.57 5.5 6.6 CCM15S CG2-95 Front panels on card mount may be removed for custom punching, CM62F95-4 7.0 6.25 4.0 9.57 5.5 6.6 CCM15S CG2-95 plating and printing CM90F95-1 10.5 9.00 1.0 9.57 7.6 6.6 CCM18S CG2-95 CM90F95-2 10.5 9.00 2.0 9.57 7.6 6.6 CCM18S CG2-95 Modules may be secured by thumb screws (SC10-3A, 10-32 included) CM90F95-4 10.5 9.00 4.0 9.57 7.6 6.6 CCM18S CG2-95 For Desktop outer enclosure, see page 42 Card Guides Free Standing Connector Mounted Card Guides Secure connection, rugged support of 0.062 thick, free standing circuit boards. For applications in which space is at a premium. Several sizes and styles available. Aluminum alloy construction. Mounting hardware included (HD55 Hardware Kit) Use With For Use With Part No. A B C D Connector 4.5 wide Plugbords with centered contacts, R644 .25 2.96 .47 BR27D .60 such as Vector 3677, 3682 and 3662 series Typical BR27 mounting (Ordering Table see page 37) A Fine Technology Group Specifications subject to change without notice Subracks