201161 - BAG, STATSHIELD METAL IN 380MM x 455MM, 100/PK Features - Prior Vermason Item Number: BC8DF - Gives Faraday Cage Protection against electrostatic discharges 4 9 - Rs:1 x 10 to < 1 x 10 ohms Inside and out - Static Shielding <25 nJ per EN61340-5-1 ANSI/ESD S11.31 - Good see-through clarity - Heat sealable - Sold in packages of 100 bags packaged in a protective oversized ESD bag 11 - Resistance of outer surface: <10 ohms per EN 61340-5-1 Test Method A.4 11 - Resistance of inner surface: <10 ohms per EN 61340-5-1 Test Method A.4 Thickness: Nominal .0030 (.0762mm) 10% STATSHIELD METAL-IN SHIELDING SERIES Statshield Metal-In Shielding Bags meet the required limits EN 61340-5-1 and Packaging standard IEC 61340-5-3 tested per IEC 61340-2-3 and ANSI/ESD STM11.31. Specifications: Electrical Properties Typical Values Test Procedures/Method Surface Resistance: 4 11 Outer Surface 1 x 10 to < 1 x 10 ohms IEC 61340-2-3 4 11 Inner Surface 1 x 10 to < 1 x 10 ohms IEC 61340-2-3 Discharge Shielding <20 nJ ANSI/ESD STM11.31 Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane Quartz: 0.01 nC/sq. in. Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30V EIA 541 Physical Properties Bag Thickness: Thickness Nominal 0.0762mm 10% MIL-STD-3010, 1003 Width (Inside Dimensions) Nominal 6mm Length (Inside Dimensions) Nominal 6mm Light Transmission (%) >40% (Tobias) ASTM D-1003 S Heat Seal (lbs/in) >10 375F, 1/2 sec 60 psi Tensile 9000 PSI ASTM D882 Date & Lot Code Puncture Resistance (lbs) >10 MIL-STD-3010, 2065 Printed for QC 2 MVTR (gms / 100 in / 24 hrs, 100F) <0.40 FTMS 101C/2065 Traceablility Silicone and Amine content Not detected ASTM E168 Chemical Properties Corrosion No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel Polycarbonate Capability, Yes Side Weld Seals 10 mm ( 3mm) Bag is free of amines, N-octanoic acid, silicones and heavy metals. Tolerance W: 6mm / Tolerance L: 6mm Packaging Standard EN 61340-5-3 clause 5.3 Outside an EPA Low Charging Static Transportation of sensitive products outside of an EPA shall require packaging that provides both: Dissipative Proprietary a) dissipative or conductive materials for intimate contact Outer Polyester Layer b) a structure that provides electrostatic discharge shielding NOTE 1: If electrostatic field shielding materials are used to provide discharge shielding, a material that provides a Aluminum Shielding Layer barrier to current flow should be used in combination with the electrostatic field shielding material. Low Charging Static NOTE 2 Dissipative materials are preferred for intimate packaging in situations where charged device model (CDM) Dissipative Proprietary Inner damage is a concern. Polyethylene Layer RoHS 2 and REACH Compliance Statement Mixed Unsortable Plastic Scrap None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2013-06-20 Mixed unsortable plastic scrap shall contain assorted plastics of are intentionally added in manufacturing this product. Ref: EU Directive 2011/65/EU effective 2013-01-03 multiple grades that are co-extruded, bonded or laminated together 7 and Regulation (EC) No. 1907/2006. See Desco Industries Inc. Limited Warranty at Vermason.co.uk which are unsortable into individual grades Vermasons bags are recyclable Statshield and Statfree are Registered Trademarks of Desco Industries Inc. Made in the Click HERE for a complete bag selection chart. United States of America* Statshield bags are packaged 100 per package in an oversized shielding bag. See Statshield Bag Storage Information. *Film made in the United States of America or Malaysia Specifications and procedures subject to change without notice. STATSHIELD BAG, SHIELDING, METAL-IN VERMASON DATE: UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, Drawing Number HERTS, SG6 2TD UK January PHONE: +44 (0) 1462-672005 201000 2014 E-MAIL:Service Vermason.co.uk, INTERNET Vermason.co.uk 2014 VERMASON.