Tape is wound on a low-sloughing plastic core. RoHS Compliance Statement ESD Cellulose Tape None of the following materials are intentionally added in manufacturing this product: lead, For general purpose applications mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Vermason Inc. 2.4 mil (0.06 mm) total thickness letter on-lin e at Vermason.co.uk/RoHS.aspx. Cellulose film resistance 10E10 - 10E11ohms Replace regular adhesive tapes with ESD tapes complying with EN 61340-5 Rubber based adhesive absorbs moisture All generators of electrostatic charges, such as untreated plastic films, foams, synthetic fibres, adhesive tapes, etc., must be prohibited and should be kept Adhesive surface resistance 10E10 - 10E11 ohms away from the EPA ESD protected area . (EN 61340-5-2 section 6) Temperature Range -10C - 71C (14F - 160F) EPA should never have any electrostatic generative adhesive tapes or labels, as these can cause very high potentials when applied or stripped off. (EN meets MIL-B-81705 of 100C for 10 min max 61340-5-1 section 7.4) Available only in clear. Wescorp Tape Storage and Limited Warranty: The user must determine the suitability for use of an ESD tape for his particular application. For best results, tape inventory should be continually replenished. It is recommended that rolls of tape Tape 12 mm 18 mm 24 mm 48 mm Core Length be stored flat and rotated (flipped over to the other side) periodically. Tapes should be stored in a 242290 242291 242292 2.54 cm 32.9 m dry, well ventilated room with a reasonably consistent temperature of 68F (20C) and be protected ESD Clear Cellulose 242296 242293 242294 242295 7.62 cm 65.8 m from exposure to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the users Width tolerance 0.8 mm application. Vermason recommends those tracking useful life of product to use shipping/invoice date as Vermason expressly warrants that for a period of one (1) year from the date of purchase, our Wescorp Brand ESD Tape will be free of defects in material (parts) and workmanship (labor). Tape widths are nominal See details of Limited Warranty online at Vermason.co.uk metric 0.8 mm 6 mm nominal or 0.236 .031 *Wescorp is a Desco Industries brand. 12 mm nominal or 0.472 .031 No sulfur, surfactants or silicone based material (adhesive, film backing, release material) is used 18 mm nominal or 0.709 .031 in the manufacture of our cellulose tape. 24 mm nominal or 0.945 .031 48 mm nominal or 1.890 .031 Specifications and procedures subject to change without notice Wescorp* ESD Cellulose Tape, Plastic Core VERMASON DATE: UNIT C, 4TH DIMENSION, FOURTH AVENUE, LETCHWORTH, HERTS, DRAWING NUMBER SG6 2TD UK July PHONE: +44 (0) 1462-672005, FAX: +44 (0) 1462-670440 242290 2010 E-MAIL: Service Vermason.co.uk, INTERNET: Vermason.co.uk 2010 VERMASON.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Vermason manufacturer: Other Similar products are found below : 072425B 229765 200535 222547 222562 50424 229625 242296 210320 210300 35268 220522 242140 47200 231250 203065 237670 231288 242210 242278 242291 239260 222635 237195 203005 241090 229100 242276 230310 J6609 242271 47201 242274 230480 238711 200520 35594 35595 230660 230500 237675 211045 231275 229775 237200 229755 203015 229630 230260 200515