Product Information No: PIS 044 Page 1 of 1 Issue No 5 Date 10 October 2002 Approved by PERSONAL OPERATOR PAD Code J0425/J0426/J0420 FEC Part No: 738669/738670 Description Personal operator pads are used to protect conductive hard laminate work surfaces and to reduce operator fatigue and damage to components from working on a hard surface. Cut from a single layer foamed PVC material, the pads are grey and will lay flat, with a non-glare, easy to clean surface. They are approximately 6 mm thick. The chief electrical properties are volume 10 8 10 resistivity of < 10 ohm and the point to point resistance of 10 to 10 ohm. FEC Vermason 738669 J0425 Mat 450 x 380mm 738670 J0426 Mat 600 x 450mm Specification 10 Surface resistance <10 ohms / square Surface resistance (when used in conjunction 9 with a dissipative worktop) 10 ohms / square 3 Density 260 - 290 Kgs / m Thickness 6mm + / - 10% Colour Light grey Elongation 150% Compression set 10% (max) Water absorption 8 - 10% Cold flex Pass -30C Fire rating Self-extinguishing Temperature -50C to +60C Chemical compositionGood resistance to acids, mineral oil, alcohol, alkalis, petrol, soap and detergents For further information, please contact Vermason Ltd, 1 Avenue One, Letchworth, Hertfordshire SG6 2HB Tel: +44(0)1462 672005 Fax: +44(0)1462 670440 e-mail : sales vermason.co.uk www.vermason.co.ukX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for vermason manufacturer: Other Similar products are found below : 203015 237670 230260 238711 35594 230660 072425B 50424 242296 229775 J6609 VER-29082 47200 231725 231250 242270 47201 230480 203065 237200 229100 249205 230310 229795 230647 230370 231275 237675 231280 35267 242278 231345 35595 229135 230646 VER-26457 230420 35592 35622 241030 241100 ASBB4