VAB-600 (PICO-ITX) VIA

Board Placement ARM-based Pico-ITX Series Mini USB A/B Type Mini HDMI DC Jack RJ45 Micro SD VIA CIR DC-In Conn KPAD Touch Screen VAB-600 Pico-ITX Cortex-A9 Board SIM Card Mini PCIe Slot (Only USB I/F) with Mini-USB, Mini-HDMI, Battery Charger Conn COM and LAN PWR On Select Jumper Front Audio RTC Battery Conn COM Front Panel GPIOx8+I2C USB Port For WiFi module SPI Specifications Features Model Name VAB-600 Supports integrated graphics processing (GPU) for 3D/2D Processor Cortex-A9 single core WM8950 800MHz System Memory 1 x Onboard DDR3 1066 1GB graphics acceleration Flash Storage 1 x Onboard 512KB SPI Flash for Boot Loader 1 x Onboard 4GB eMMC Flash Supports Android 4.0 and Embedded Linux Graphics and Video Built-in 2D/3D Graphic Engine to support OpenGL ES 2.0 Built-in video multi-standard decoder to support MPEG2 MP HL, MPEG4, H.264 BP/MP/ HP L4.0, VC-1 SP/MP/AP, VP8 and JPEG/MJPEG decoding Optional support 3G module Audio VIA VT1603A I2S Audio Codec Supports two COM ports Ethernet VIA VT6113 10/100 base-TX PHY chip (support Tx/Rx) WiFi Module Optional VIA VNT9271B6050 WiFi module (shared with one USB port) Onboard I/O 1 x DVO connector for TTL or LVDS display (the corresponding daughter card is required) Supports 12~24V DC-in 2 x COM connectors (supports Tx/Rx) 1 x Micro-SD card reader connector 1 x RTC battery pin header Flexible display choices: Mini- 1 x USB 2.0 connector HDMI, LVDS and TTL (optional) 1 x SPI connector for programming SPI Flash ROM 1 x Mini card slot (supports USB 2.0 connectivity for optional 3G module) 1 x SIM card slot (supports the 3G module without built-in SIM card slot) 1 x Keypad connector 1 x CIR connector 1 x Front audio pin header for Line-in, Line-out and MIC-in 1 x Front panel pin header for system power-on, reset and power LED 1 x 4-wire resistive touch screen FPC connector (through VT1603A) 1 x Miscellaneous pin header for 1 I2C pair and 8 GPIOs 1 x 12~24V DC-In connector 1 x Battery charger connector with smart battery function (manufacturing option) Back Panel I/O 2 x Mini-USB 2.0 (type A/B) ports 1 x Mini-HDMI port 1 x RJ-45 LAN port 1 x 12~24V DC-in Jack Operating System Android 4.0 and Embedded Linux Operating 0C up to 60C Temperature Operating Humidity 0% ~ 95% (relative humidity non-condensing) Form Factor Pico-ITX, 10 cm x 7.2 cm (3.9 x 2.8)Back Panel I/O Accessories VAB-600-A I/O card DC Micro Mini USB Mini RJ-45 Jack SD A/B Type HDMI VAB-600-C TTL converter card VAB-600-B Additional 4 RS232 ports VAB-600-D LVDS converter card Ordering Information Model Name CPU Frequency Description VAB-600 WM8950 800MHz Pico-ITX Board with 800MHz Cortex-A9 CPU, 4GB Flash, 1GB SDRAM, 2 x Mini-USB 2.0, 1 x Mini- HDMI, 2 x COM, 1 x LAN, 12~24V DC-in power Block Diagram Packing List Items 1 x VAB-600 board HDMI DDR3 Mini- HDMI DDR3 1066 1GB 1 x DC-in cable 256Mbx16x2pcs 1 x Front panel cable DVO NAND DVO CONN NAND FLASH/eMMC 1 x Front audio cable SF 1 x COM connector cable SF (512KB) WM8950 1 x USB cable (for optional WiFi USB Cortex A9 MII SD0 VT6113 800MHz module) RJ45 Micro SD CARD UART MAX3243 Items for Starter Kit COM1 (CONSOLE) (MIC-IN) Front Audio I2S 1 x VAB-600 board (HP-OUT) VT1603A Pin Header (LINE-IN) 1 x VAB-600-A UART MAX3243 COM2 1 x VAB-600-D (with cable) (optional) 1 x Keypad cable Touch Screen CIR CIR Connector (4-wire Resitive) 1 x GPIO/I2C cable 1 x Front panel cable Front Panel USBH0 Mini card 1 x Front audio cable (Power-ON, Reset, Power LED) 1 x COM cable USB USBH1 (Mini USB AB TYPE) GPIOx8 + I2C 1 x AC adapter (Pin Header) 1 x DC-in cable USBH2 (Mini USB AB TYPE) 1 x Mini-USB cable 1 x USB cable (for WiFi USB module) USBH3 VNT9271 WI-FI 1 x 7 LVDS panel (with cable) (optional) (OPTION) * The specification is subject to change without prior notice. Update: Mar. 03, 2014. www.viaembedded.com