ENMods EN1xxx Actual size: 2.28 x 2.2 x 0.5in S 57,9 x 55,9 x 12,7mm CUNRTL S C US Component Power Front-end System for EN Compliance Features & Benefits Absolute Maximum Ratings RoHS Compliant (with F or G pin style)Parameter Rating Unit Notes FARM3 Passive harmonic current attenuation 264 V Continuous RMS L to N voltage to EN61000-3-2 280 V 100ms RMS 575W rated power output +OUT to OUT voltage 400 V DC BOK to OUT voltage 16 V DC Autoranging 115/230V input AC EN to OUT voltage 16 V DC Inrush current limiting Mounting torque 4 6 0.45 0.68 in lbs N m 6 each, 4-40 screw Operating temperature 40 to +100 C H-Grade Product Highlights Storage temperature 55 to +125 C H-Grade 500 260 F C <5sec wave solder The ENMod system is a new AC front-end Pin soldering temperature 750 390 F C <7sec hand solder solution for compliance to electromagnetic compatibility (EMC) standards. It consists of Output current 3.5 A the MiniHAM passive harmonic attenuation Baseplate temperature 100 C module and the FARM3 autoranging AC-DC front-end module. Combined with the filtering and hold-up capacitors as specified herein, the Thermal Resistance ENMod system provides full compliance to: EN61000-3-2 Harmonic Current Parameter Min Typ Max Unit EN55022, Level B Conducted Emissions Baseplate to sink EN61000-4-5 Surge Immunity flat, greased surface 0.16 C/Watt EN61000-4-11 Line Disturbances with thermal pad (P/N 20264) 0.14 C/Watt EN61000-3-3 Inrush Current Baseplate to ambient The MiniHAM is the first passive product Free convection 8.0 C/Watt specifically designed for compliance to EN 1000LFM 1.9 C/Watt harmonic current limits. Unlike active PFC solutions, the MiniHAM generates no EMI, greatly simplifying and reducing system noise Part Numbering filtering requirements. It is also considerably smaller and more efficient than active alternatives and improves MTBF by an order EN1 C 1 1 of magnitude. Optimized for operation on the a b Baseplate Product Type Product Grade Temperatures (C) Pin Style DC bus (provided by the FARM3) rather than 1 = Slotted Grade Operating Storage 1 = Short Pin directly on the AC line, it will provide harmonic 2 = Threaded 2 = Long Pin C = 20 to +100 40 to +125 3 = Thru-hole current compliance at up to 600W of input S = Short ModuMate T = 40 to +100 40 to +125 N = Long ModuMate H = 40 to +100 55 to +125 power at 230V . AC F = Short RoHS G = Long RoHS The 115/230V input FARM3 is a new AC member of the Vicor filter and autoranging module product line that has been optimized for use as the front end for the MiniHAM. Both modules are in Vicor standard Mini half-brick a EN1 product includes one each MiniHAM and FARM3 with same product grade, pin package. Together with Vicor 300V input and baseplate style DC-DC converters, they form the basis of a b Pin styles S & N are compatible with the ModuMate interconnect system for socketing low-noise, high-efficiency, rugged, simple and and surface mounting reliable EN-compliant power system. Note: Product images may not highlight current product markings. ENMods Rev 3.4 Page 1 of 13 06/2019EN1xxx Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output power and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Performance specifications are based on the ENMod system as shown in Figure 1a. Input Specifications (see Figures 3 through 7 for operating characteristics) Parameter Min Typ Max Unit Notes Operating input voltage Low range 90 115 132 V Autoranging (doubler mode) AC High range 180 230 264 V Autoranging (bridge mode) AC Input undervoltage 90 V Shut down AC AC line frequency 47 63 Hz C-, and T-Grade Power factor 0.68 0.72 Typical line Inrush current 30 Amps 264V line voltage AC Output Specifications Parameter Min Typ Max Unit Notes Output power 0 575 Watts Efficiency 115V 93 94 % Full load AC 230V 96 97 % Full load AC Output voltage 250 375 V DC External hold-up capacitance 1,750 F 2-3300F in SeriesHUB 3300S Control Specifications Parameter Min Typ Max Unit Notes AC Bus OK (BOK) Low state resistance 15 To negative output Bus normal Low state voltage 0.1 V 50mA maximum DC High state voltage 14.8 15.0 15.2 V Bus abnormal, 27k internal pull up to 15V (see Figure 12) DC DC BOK true threshold 235 240 245 V Output Bus voltage DC BOK false threshold 200 205 210 V Output Bus voltage DC Module Enable (EN) Low state resistance 15 To negative output Converters disabled Low state voltage 0.1 V 50mA maximum DC High state voltage 12 14 16 V 150k internal pull up to 15V (see Figure 11) DC DC Enable threshold 235 240 V Output bus voltage DC Disable threshold 185 190 195 V Output bus voltage DC AC Bus OK - Module Enable, 12 14 16 V AC Bus OK and Module Enable thresholds track DC differential error* * Tracking error between BUS OK and Enable thresholds ENMods Rev 3.4 Page 2 of 13 06/2019