Maxi Family 110V Input Actual size: 4.6 x 2.2 x 0.5in S 117 x 56 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications Railway/Transportation system applications including communications systems, DC input range: 66 154V (continuous) information display, lighting, control systems, ticket machines, passenger Isolated output entertainment, public address systems, door control, industrial power systems and power generation systems. Encapsulated circuitry for shock and vibration resistance For details on proper operation please refer to the: Extended temperature range Design Guide & Applications Manual for Maxi, Mini, Micro Family. (55 to +100C) Input surge withstand: 250V for 100ms Absolute Maximum Ratings DC output: 3.3 48V Programmable output: 10 110% Parameter Rating Unit Notes Regulation: 0.2% no load to full load +IN to IN voltage 0.5 to +260 V DC Efficiency: Up to 90% PC to IN voltage 0.5 to +7.0 V DC Maximum operating temp: 100C, PR to IN voltage 0.5 to +7.0 V DC full load SC to OUT voltage 0.5 to +1.5 V DC Power density: up to 80W per cubic inch Sense to OUT voltage 1.0 V DC Height above board: 0.43in 10,9mm Isolation voltage Parallelable, with N+M fault tolerance IN to OUT 3000 V Test voltage RMS Low-noise ZCS/ZVS architecture IN to base 1500 V Test voltage RMS RoHS Compliant (with F or G pin option) OUT to base 500 V Test voltage RMS Operating Temperature 55 to +100 C M-Grade Product Overview Storage Temperature 65 to +125 C M-Grade These DC-DC converter modules use advanced 500 260 F C <5 sec wave solder power processing, control and packaging Pin soldering temperature 750 390 F C <7 sec hand solder technologies to provide the performance, flexibility, reliability and cost effectiveness of a Mounting torque 5 0.57 in lbs N m 6 each mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V110A24C400BL 110A B Product Type Output Power Output Voltage Product Grade Temperatures (C) Pin Style Finish Baseplate V P Blank: Slotted 3V3 = 3.3V Grade Operating Storage OUT OUT Blank: Short Tin/Lead V = Standard 2: Threaded 5 = 5V L: Long Tin/Lead S = Enhanced E = 10 to +100 20 to +125 3.3V 150W, 200W 3: Through-hole 8 = 8V S: Short ModuMate Gold efficiency C = 20 to +100 40 to +125 5V 200W, 300W 12 = 12V N: Long ModuMate Gold (avail. 12 T = 40 to +100 40 to +125 8V 200W, 300W 15 = 15V F: Short RoHS Gold V only) H = 40 to +100 55 to +125 OUT 12V 300W, 400W 24 = 24V G: Long RoHS Gold M = 55 to +100 65 to +125 15V 300W, 400W 28 = 28V K: Extra Long RoHS Gold 24V 300W, 400W 36 = 36V 28V 300W, 400W 48 = 48V 36V 300W, 400W 48V 300W, 400W Note: Product images may not highlight current product markings. 110V Maxi Family Rev 3.6 Page 1 of 14 02/2021110V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 66 110 154 V Per EN50155 and GBT-25119 DC Input surge withstand 250 V <100ms DC Undervoltage turn-on 64 65.4 V DC Undervoltage turn-off 54 56 V DC Overvoltage turn-off/on 155.5 161.7 169.4 V DC Disabled input current 1.3 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % / C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% Programming range 10 110 % of nominal, a minimum load of 10% of maximum rated power may be required. +OUT to OUT, +Sense to OUT Absolute Maximum Ratings 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.4 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 9. Thermal Resistance and Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.08 C/Watt Baseplate to sink thermal pad (P/N 20263) 0.07 C/Watt Baseplate to ambient 4.9 C/Watt Baseplate to ambient 1000LFM 1.1 C/Watt Thermal capacity 165 Watt-sec/C 110V Maxi Family Rev 3.6 Page 2 of 14 02/2021