Micro Family 110V Input Actual size: 2.28 x 1.45 x 0.5in S 57,9 x 36,8 x 12,7mm CUNRTL S C US DC-DC Converter Module Features & Benefits Applications Railway/Transportation system applications including communications systems, DC input range: 66 154V (continuous) information display, lighting, control systems, ticket machines, passenger Isolated output entertainment, public address systems, door control, industrial power systems and power Encapsulated circuitry for shock and generation systems. vibration resistance For details on proper operation please refer to the: Extended temperature range Design Guide & Applications Manual for Maxi, Mini, Micro Family. (55 to +100C) Input surge withstand: 250V for 100ms DC output: 3.3 48V Absolute Maximum Ratings Programmable output: 10 110% Regulation: 0.3% no load to full load Parameter Rating Unit Notes Efficiency: Up to 90% +IN to IN voltage 0.5 to +260 V DC Maximum operating temp: 100C, PC to IN voltage 0.5 to +7.0 V DC full load PR to IN voltage 0.5 to +7.0 V DC Power density: up to 91W per cubic inch SC to OUT voltage 0.5 to +1.5 V DC Height above board: 0.43in 10,9mm Sense to OUT voltage 1.0 V DC Parallelable, with N+M fault tolerance Isolation voltage Low-noise ZCS/ZVS architecture IN to OUT 3000 V Test voltage RMS RoHS Compliant IN to base 1500 V Test voltage RMS (with F or G pin option) OUT to base 500 V Test voltage RMS Operating Temperature 55 to +100 C M-Grade Product Overview Storage Temperature 65 to +125 C M-Grade These DC-DC converter modules use advanced 500 260 F C <5 sec wave solder Pin soldering temperature power processing, control and packaging 750 390 F C <7 sec hand solder technologies to provide the performance, flexibility, reliability and cost effectiveness of a Mounting torque 5 0.57 in lbs N m 6 each mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. Part Numbering e.g. V110C12C100BL 110C B Output Voltage Output Power Pin Style Finish Baseplate Product Grade Temperatures (C) Product Type V P Blank: Slotted OUT OUT Blank: Short Tin/Lead 3V3 = 3.3V Grade Operating Storage V = Standard 2: Threaded 5 = 5V L: Long Tin/Lead 3.3V 50W E = 10 to +100 20 to +125 S = Enhanced 8 = 8V 3: Through-hole S: Short ModuMate Gold 5V 75W, 125W C = 20 to +100 40 to +125 efficiency 12 = 12V N: Long ModuMate Gold 8V 75W (avail. 12 T = 40 to +100 40 to +125 15 = 15V F: Short RoHS Gold V only) 12V 100W H = 40 to +100 55 to +125 OUT 24 = 24V G: Long RoHS Gold 15V 100W, 150W M = 55 to +100 65 to +125 28 = 28V K: Extra Long RoHS Gold 24V 100W, 150W 36 = 36V 48 = 48V 28V 100W 36V 100W 48V 100W, 150W Note: Product images may not highlight current product markings. 110V Micro Family Rev 4.4 Page 1 of 13 02/2021110V Input Module Family Electrical Characteristics Electrical characteristics apply over the full operating range of input voltage, output load (resistive) and baseplate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the baseplate. Module Input Specifications Parameter Min Typ Max Unit Notes Operating input voltage 66 110 154 V Per EN50155 and GBT-25119 DC Input surge withstand 250 V <100ms DC Undervoltage turn-on 64 65.4 V DC Undervoltage turn-off 54 56 V DC Overvoltage turn-off/on 155.5 161.7 169.4 V DC Disabled input current 1.3 mA PC pin low Module Output Specifications Parameter Min Typ Max Unit Notes Output voltage set point 1 % Of nominal output voltage. Nominal input full load 25C Line regulation 0.02 0.20 % Low line to high line full load Temperature regulation 0.002 0.005 % / C Over operating temperature range Power sharing accuracy 2 5 % 10 100% of full load Of nominal output voltage. For trimming below 90% Programming range 10 110 % of nominal, a minimum load of 10% of maximum rated power may be required. +OUT to OUT Absolute Maximum Ratings 3.3V 0.5 to 4.7 V Externally applied DC 5V 0.5 to 7.0 V Externally applied DC 8V 0.5 to 10.9 V Externally applied DC 12V 0.5 to 16.1 V Externally applied DC 15V 0.5 to 20.0 V Externally applied DC 24V 0.5 to 31.7 V Externally applied DC 28V 0.5 to 36.9 V Externally applied DC 36V 0.5 to 47.4 V Externally applied DC 48V 0.5 to 62.9 V Externally applied DC Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information, please refer to output connections on page 8. Thermal Resistance and Capacity Parameter Min Typ Max Unit Baseplate to sink flat, greased surface 0.24 C/Watt Baseplate to sink thermal pad (P/N 20265) 0.21 C/Watt Baseplate to ambient 10.9 C/Watt Baseplate to ambient 1000LFM 2.8 C/Watt Thermal capacity 48 Watt-sec/C 110V Micro Family Rev 4.4 Page 2 of 13 02/2021