109D www.vishay.com Vishay Wet Tantalum Capacitors Sintered Anode TANTALEX Capacitors for Operation to +125 C, Elastomer-Sealed FEATURES Axial through-hole terminations: standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Vishay Sprague model 109D tubular Available elastomer-sealed, sintered anode TANTALEX capacitors fill the basic requirements for applications where a superior quality, reliable design for industrial, automotive and Available telecommunications application is desired. Model 109D capacitors are the commercial equivalents of Tansitor style WC, UWC, Mallory-NACC style TLS, TLH and the military style CL64 and CL65, designed to meet the performance requirements of military specification MIL-DTL-3965. Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C Following the life test: (to +125 C with voltage derating) 1. DCL shall not exceed the initial requirements or 1 A, Capacitance Tolerance: at 120 Hz, +25 C. whichever is greater. 20 % standard. 10 %, 5 % available as special. 2. The ESR shall meet the initial requirement. DC Leakage Current (DCL max.): 3. Change in capacitance shall not exceed 10 % from the at +25 C, +85 C, +125 C: leakage current shall not exceed initial measurement. For capacitors with voltage ratings the values listed in the Standard Ratings tables. of 15 V and below, change in capacitance shall not DC Life Test: capacitors are capable of withstanding a exceed + 10 %, - 25 % from the initial measurement. 2000 h life test at a temperature of +85 C or +125 C at the applicable DC working voltage. ORDERING INFORMATION 109D 207 X0 006 C 0 E3 MODEL CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS-COMPLIANT TOLERANCE AT +85 C CODE This is expressed X0 = 20 % This is expressed in volts. See 0 = no outer sleeve E3 = 100 % tin in picofarads. The X9 = 10 % To complete the Ratings Standard termination first two digits are X5 = 5 % three-digit block, zeros and Case 2 = outer plastic film (RoHS-compliant) the significant special order precede the voltage Codes insulation Blank = SnPb figures. The third is rating. A decimal point is table termination the number of indicated by an R (standard design) zeros to follow (6R3 = 6.3 V) Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight. Revision: 31-Mar-15 Document Number: 40023 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 109D www.vishay.com Vishay DIMENSIONS in inches millimeters 0.250 6.35 L max. D - + 0.025 6.35 dia. (no. 22 AWG) tinned solderable leads WITH PLASTIC-FILM BARE TUBE CASE INSULATING SLEEVE LEAD LENGTH CODE D L D Max. L Max. C 0.188 0.016 4.78 0.41 0.453 + 0.031 / - 0.016 11.51 + 0.79 / - 0.41 0.219 5.56 0.608 15.45 1.500 0.250 38.10 6.35 F 0.281 0.016 7.14 0.41 0.641 + 0.031 / - 0.016 16.28 + 0.79 / - 0.41 0.312 7.92 0.796 20.22 2.250 0.250 57.15 6.35 T 0.375 0.016 9.53 0.41 0.766 + 0.031 / - 0.016 19.46 + 0.79 / - 0.41 0.406 10.31 0.921 23.40 2.250 0.250 57.15 6.35 (1) K 0.375 0.016 9.53 0.41 1.062 + 0.031 / - 0.016 26.97 + 0.79 / - 0.41 0.406 10.31 1.217 30.91 2.250 0.250 57.15 6.35 Note (1) Replaces previous W case RATINGS AND CASE CODES (Standard) F 6 V 8 V 10 V 15 V 20 V 25 V 30 V 35 V 50 V 60 V 75 V 100 V 125 V 1.7 C 2.5 C 3.0 C 3.5 C 3.6 C 4.0 C 4.5 C 4.7 C 5.0 C 6.8 C 7.0 C 8.0 C 8.2 C 9.0 F 10 C C F 11 F 13 F 14 F 15 C C F 18 T 20 C F 22 C C F F 25 C F T 27 C C 30 C T 33 C F 39 F 40 F T 43 T 47 C F 50 F T 56 C T K 60 T Revision: 31-Mar-15 Document Number: 40023 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000