134D227X0100K6 Vishay

134D www.vishay.com Vishay Sprague Wet Tantalum HI-TMP Capacitors Tantalum Case With Glass-to-Tantalum Hermetic Seal for -55 C to +200 C Operation FEATURES High capacitance Hermetically sealed, tantalum case Available +200 C high temperature Available Terminations: axial, standard tin / lead (SnPb) 100 % tin (RoHS-compliant) available Mounting: through-hole Available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PERFORMANCE CHARACTERISTICS Note Operating Temperature: -55 C to +85 C * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For (to +200 C with voltage derating) example, parts with lead (Pb) terminations are not RoHS-compliant. Capacitance Tolerance: at 120 Hz, +25 C 20 % Please see the information / tables in this datasheet for details standard 10 % DC Leakage Current (DCL Max.): at +25 C and above: APPLICATIONS leakage current shall not exceed the values listed in th e Industrial Standard Ratings tables. Life Test: capacitors are capable of withstanding a Petroleum exploration minimum 500 h life test at a temperature of +200 C at the High temperature / high stress environment applicable derated DC working voltage. ORDERING INFORMATION 134D 227 X0 100 K 6 E3 TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS-COMPLIANT TOLERANCE AT +85 C CODE This is expressed in X0 = 20 % This is expressed in volts. See High temperature E3 = 100 % tin picofarads. The first X9 = 10 % To complete the three-digit Ratings 8 = no outer termination two digits are the block, zeros precede the and Case insulating sleeve (RoHS-compliant design) significant figures. The voltage rating. A decimal Codes 6 = high Blank = SnPb third is the number of point is indicated by an R table temperature termination zeros to follow (6R3 = 6.3 V) film insulation (standard design) (above +125 C) Note Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to the unit weight DIMENSIONS in inches millimeters EL E D 1 0.0253 0.002 0.64 0.05 dia. (No. 22 AWG tinned nickel leads Weld Tantalum solderable and weldable) L 2 CASE CODE WEIGHT (g) (1) DL L (Max.) E 1 2 TYPE 134D CLR 79 / 81 EQUIV. (Max.) 0.188 0.016 0.453 + 0.031 / - 0.016 0.734 1.500 0.250 CT1 2.6 4.78 0.41 11.51 + 0.79 / - 0.41 18.64 38.10 6.35 0.281 0.016 0.641 + 0.031 / - 0.016 0.922 2.250 0.250 FT2 6.2 7.14 0.41 16.28 + 0.79 / - 0.41 23.42 57.15 6.35 0.375 0.016 0.766 + 0.031 / - 0.016 1.047 2.250 0.250 TT3 11.6 9.53 0.41 19.46 + 0.79 / - 0.41 26.59 57.15 6.35 0.375 0.016 1.062 + 0.031 / - 0.016 1.343 2.250 0.250 KT4 17.7 9.53 0.41 26.97 + 0.79 / - 0.41 34.11 57.15 6.35 Note (1) For insulated parts, add 0.015 inches 0.38 mm to the diameter. The insulation shall lap over the ends of the capacitor body Revision: 23-Mar-2021 Document Number: 40072 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 134D www.vishay.com Vishay Sprague STANDARD RATINGS TYP. AC CAPACITANCE MAX. MAX. DCL (A) MAX. MAX. CAP. (%) RIPPLE LIFE TEST AT 25 C CASE 120 Hz IMP., Z CAP. 85 C PART NUMBER PERFORMANCE 120 Hz CODE ESR AT -25 C AT -25 C 85 C / 40 kHz (h AT +200 C) 25 C 200 C 85 C 125 C (F) () () (%) 125 C (mA) RMS 50 V AT 85 C 30 V AT 125 C 30 V AT 200 C DC DC DC 68 C 1.50 1 5 50 22 -6 12 55 1400 134D686(1)050C(2)(3) 500 220 F 0.90 2 10 100 9 -15 13 50 2300 134D227(1)050F(2)(3) 500 470 T 0.75 3 25 250 6 -24 10 25 2650 134D477(1)050T(2)(3) 500 680 K 0.70 5 40 400 4 -22 12 40 2900 134D687(1)050K(2)(3) 500 60 V AT 85 C 40 V AT 125 C 36 V AT 200 C DC DC DC 47 C 2.00 1 5 50 34 -8 8 12 1250 134D476(1)060C(2)(3) 500 150 F 1.10 2 10 100 13 -11 10 30 2050 134D157(1)060F(2)(3) 500 390 T 0.90 3 25 250 7 -27 10 25 2450 134D397(1)060T(2)(3) 500 560 K 0.80 5 40 400 5 -21 12 40 2700 134D567(1)060K(2)(3) 500 75 V AT 85 C 50 V AT 125 C 45 V AT 200 C DC DC DC 33 C 2.50 1 5 50 45 -3.5 8 25 1100 134D336(1)075C(2)(3) 500 110 F 1.30 2 10 100 16 -8 8 30 1900 134D117(1)075F(2)(3) 500 330 T 1.00 3 30 300 8 -30 10 25 2300 134D337(1)075T(2)(3) 500 470 K 0.90 5 50 500 6 -20 10 40 2550 134D477(1)075K(2)(3) 500 100 V AT 85 C 65 V AT 125 C 60 V AT 200 C DC DC DC 15 C 3.50 1 5 50 95 -2.5 8 25 950 134D156(1)100C(2)(3) 500 68 F 2.10 2 10 100 25 -6 8 25 1500 134D686(1)100F(2)(3) 500 150 T 1.60 3 25 250 14 -12 8 22 1800 134D157(1)100T(2)(3) 500 220 K 1.20 5 50 500 13 -44 8 15 2200 134D227(1)100K(2)(3) 1000 125 V AT 85 C 85 V AT 125 C 75 V AT 200 C DC DC DC 10 C 5.50 1 5 50 145 -2.5 8 20 750 134D106(1)125C(2)(3) 500 47 F 2.30 2 10 100 35 -5 7 20 1450 134D476(1)125F(2)(3) 500 50 F 2.30 3 10 100 35 -5 7 20 1450 134D506(1)125F(2)(3) 500 100 T 1.80 3 25 250 24 -20 8 20 1700 134D107(1)125T(2)(3) 500 150 K 1.60 5 50 500 13 -10 6 12 1900 134D157(1)125K(2)(3) 500 Note Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = no film insulation, 6 = high temperature film insulation (3) Termination: blank = standard tin/lead, E3 = RoHS-compliant 100 % tin Revision: 23-Mar-2021 Document Number: 40072 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000