195D107X96R3Z2T Vishay

195D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT, Conformal Coated FEATURES 8 mm, 12 mm tape packaging to EIA-481 reeling per IEC 60286-3. Available 7 (178 mm) standard 13 (330 mm) available Available US and European case sizes available Terminations: 100 % tin (2) standard, Available tin / lead available Available All cases except R case are halogen-free Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE / ELECTRICAL CHARACTERISTICS www.vishay.com/doc 40194 Capacitance Tolerance: 10 %, 20 % standard Operating Temperature: -55 C to +125 C Voltage Rating: 2 V to 50 V DC DC (above 85 C, voltage derating is required) Moisture Sensitivity Level 2a Capacitance Range: 0.1 F to 330 F ORDERING INFORMATION 195D 106 X0 004 S 2 T TYPE CAPACITANCE CAPACITANCE DC VOLTAGE CASE CODE TERMINATION PACKAGING TOLERANCE RATING AT +85 C This is expressed X0 = 20 % This is expressed in See Ratings Style 2 is standard T = tape and reel in picofarads. X9 = 10 % volts. To complete and Case 2 = 100 % tin 7 178 mm reel The first two digits X5 = 5 % the three-digit Codes table 4 = gold plated standard. are the significant (Special order) block, zeros 8 = solder plated For H case size figures. The third precede the voltage (60/40) lengthwise is the number of rating. A decimal Special order W = tape and reel zeros to follow. point is indicated by 13 330 mm reel an R (6R3 = 6.3 V). available See Standard Packaging Quantity table Note Preferred tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size Revision: 14-Jun-2019 Document Number: 40001 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 195D www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters Tantalum wire nib identifie s anode (+) W terminal C L B D J REF. J MAX. MAX. A H CASE L W H A B C (MIN.) D (REF.) J (MAX.) CODE STANDARD CASE CODES 0.087 max. 0.045 0.010 0.045 0.010 0.016 0.008 0.042 0.010 0.063 0.004 C - 2.21 max. 1.14 0.25 1.14 0.25 0.40 0.20 1.07 0.25 1.60 0.10 0.143 max. 0.072 0.008 0.048 0.008 0.023 0.010 0.085 0.015 0.114 0.004 S - 3.63 max. 1.83 0.20 1.22 0.20 0.58 0.25 2.16 0.37 2.90 0.10 0.143 max. 0.104 0.010 0.051 0.010 0.023 0.010 0.085 0.015 0.114 0.004 V - 3.63 max. 2.65 0.25 1.30 0.25 0.58 0.25 2.16 0.37 2.90 0.10 0.285 max. 0.104 0.010 0.051 0.010 0.039 0.020 0.200 0.027 0.244 0.004 X - 7.24 max. 2.65 0.25 1.30 0.25 1.00 0.50 5.08 0.69 6.20 0.10 0.285 max. 0.104 0.010 0.069 0.010 0.039 0.020 0.200 0.027 0.244 0.004 Y - 7.24 max. 2.65 0.25 1.75 0.25 1.00 0.50 5.08 0.69 6.20 0.10 0.285 max. 0.104 0.010 0.104 0.010 0.039 0.020 0.200 0.027 0.244 0.004 Z - 7.24 max. 2.65 0.25 2.65 0.25 1.00 0.50 5.08 0.69 6.20 0.10 0.283 max. 0.236 + 0.012 / - 0.024 0.138 0.012 0.051 0.012 0.181 0.025 0.244 0.004 R - 7.20 max. 6.0 + 0.30 / - 0.60 3.50 0.30 1.30 0.30 4.60 0.60 6.20 0.10 EUROPEAN CASE CODES 0.110 0.008 0.0591 0.012 0.055 max. 0.028 0.012 0.063 0.012 0.012 A -- 2.80 0.20 1.5 0.30 1.40 max. 0.70 0.30 1.60 0.30 0.3 0.165 0.008 0.055 0.012 0.063 max. 0.031 0.012 0.098 0.012 0.012 B -- 4.20 0.20 1.4 0.30 1.6 max. 0.80 0.30 2.50 0.30 0.3 0.165 0.008 0.083 0.012 0.063 max. 0.031 0.012 0.098 0.012 0.02 D -- 4.20 0.20 2.1 0.30 1.6 max. 0.80 0.30 2.50 0.30 0.5 0.217 0.012 0.083 0.012 0.067 max. 0.039 0.012 0.126 0.012 0.031 E -- 5.50 0.30 2.1 0.30 1.70 max. 1.00 0.30 3.20 0.30 0.8 0.236 0.012 0.130 0.012 0.079 max. 0.039 0.012 0.142 0.012 0.031 F -- 6.0 0.30 3.3 0.30 2.00 max. 1.00 0.30 3.60 0.30 0.8 0.276 0.012 0.102 0.012 0.110 max. 0.039 0.012 0.177 0.012 0.031 G -- 7.00 0.30 2.6 0.30 2.80 max. 1.00 0.30 4.5 0.30 0.8 0.307 0.012 0.146 0.012 0.118 max. 0.039 0.012 0.197 0.012 0.031 H -- 7.80 0.30 3.7 0.30 3.0 max. 1.00 0.30 5.00 0.30 0.8 Note The anode termination (D less B) will be a minimum of 0.010 (0.25 mm), C case = 0.005 (0.131 mm) minimum Revision: 14-Jun-2019 Document Number: 40001 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000