Type 225P, Orange Drop, Polyester Film/Foil Capacitors Features Radial-lead. Pressed profile. Non-inductively wound, extended foil construction. Over 35 years of proven dependability. Insulation Resistance: Wide availability through CDE At +25C: 100,000 M for .25 F Distribution. 25,000 M -F for C > .25 F At +85C: 10,000 M for C .15 F Specifications 1,500M -F for C >.15 F At+105C: 1.500 M for C .17 F Capacitance Range: 250 M -F for C > .17F .00 to 1.0 F At +125C: 200 M for C .13 F 25 M -F for C >.13 F Capacitance Tolerance: 5%, 10%, 20% Dissipation Factor: 0.75% Maximum 1 KHz, +25C Voltage Ratings: 100 to 600 Volts DC Encapsulation: Conformal coating of orange, flame retardant epoxy. Meets UL94V-0 Operating Temperature Range: specifications. -55C to +85C (at fullvoltage) Dielectric/Construction: Voltage Derating: Polyester film, single section design. At +105C, 70% of+85C rating. Non-inductively wound with extended At +125C, 50% of +85Crating. aluminum foil. Lead Wire: Tinned copper-clad steel, .032 (0.8) diameter, 20 AWG Dimensions in inches, metric (mm) in parenthesis. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Type 225P, Orange Drop, Polyester Film/Foil Capacitors General Specifications The Type 225P Orange Drop is designed and manufactured for operation in a wide range of demanding envi- ronments and applications. Type 225P capacitors are wound from the most reliable polyester film and alum- inum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125 C with proper derating. The combination of proven dependability and extensive availability through CDE distribution make the 225P an ideal choice for many commercial and industrial electronic applications, from power supplies and instrumentation to audio amplifiers and test equipment. Operating Temperature Range: Humidity Testing: The standard operating temperature range for Units subjected to 95% relative humidity for 72 polyester film is -55C to +85C. The 225P hours with no voltage applied at +75C. After 4 may be operated a t full voltage within this hours of drying minimum product of insulation temperature range. resistance and capacitance shall be 5,000 M -F. The 225P may be operated up to +105C DC Voltage Life Test: provided the DC working voltage is reduced to 70% of the +85C rating (full rating), and 500 hours at +85C at 150% of rated voltage. After up to +125C with a 50% reduction from the test capacitance shall not have changed by more +85C rating (full rating). than 5% of initial value, insulationresistance shall For more specific details regarding operation not have decreased by more than 50% ofinitial value above +85C please contact our design and dissipation factor shall not have increased to engineering department. more than 1.0%. In addition, there should be no The maximum operating temperature for the open or short circuits, and no sign of visibledamage. 225P polyester film capacitors is +125C. Typical Temperature Characteristics: Dielectric Withstanding Voltage: Units shall withstand a DC potential of 250% of rated voltage applied between terminals for not more than 5 seconds. Lead Bend Test: After 3 consecutive 180 bends. No damage. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830