Model 533, 534, 535 www.vishay.com Vishay Spectrol 7 / (22.2 mm) Multi Turn Wirewound Potentiometer - 8 533: 3 Turns / 534: 10 Turns / 535: 5 Turns FEATURES Bushing and servo mount designs available Linearity 0.25 %, down to 0.05 % on request Special resistance tolerances to 1 % Rear shaft extensions and support bearing Metric shaft available click logo to get started DESIGN SUPPORT TOOLS Dual gang configuration and concentric shafts High torque, center tap, slipping clutch on request Models Available Special markings and front shaft extensions Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, multi turn wirewound Output type Output by turrets Market appliance Industrial 7 Dimensions / (22.2 mm) 8 ELECTRICAL SPECIFICATIONS PARAMETER MODEL 533 MODEL 534 MODEL 535 Resistance range - standard values 50 to 20 k 100 to 100 k 50 to 50 k Capability range 5 to 60 k 10 to 200 k 5 to 100 k Standard tolerance 5 % 5 % 5 % Linearity (independent) 0.25 % 0.25 % 0.25 % Noise 100 ENR 100 ENR 100 ENR 1080 +10 3600 +10 1800 +10 Rotation (electrical and mechanical) -0 -0 -0 Power rating (at 70 C) 1.0 W 2.0 W 1.5 W Insulation resistance 1000 M minimum 500 V DC Dielectric strength 1000 V minimum 60 Hz RMS Absolute minimum resistance Not to exceed linearity x total resistance or 1 , whichever is greater Temperature coefficient 20 ppm/C (standard values, wire only) End voltage 0.25 % of total applied voltage, maximum Phasing CCW end points - section 2 phased to section 1 within 2 Taps Center tap only MARKING RESISTANCE VALUES Manufacturers name and model number, 533 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K resistance value and tolerance, linearity specification date code and terminal Unit identification 534 ( 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K identification. Example of a marking for a standard part: 535 ( 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K 534-11103 Revision: 17-May-2018 Document Number: 57065 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 533, 534, 535 www.vishay.com Vishay Spectrol ORDERING INFORMATION 5 3 4 B 21 03 20 3J C 4 70 OHMIC VALUE OHMIC VALUE TOLERANCE ON MODEL STYLE GANGS LINEARITY SPECIAL REQUEST o o GANGS N 1 GANGS N 2 OHMIC VALUE 533 B: bushing 1 470 = 47 470 = 47 J = 5 % C = 0.25 % Special code S: servo 2 222 = 2.200 222 = 2.200 F = 1 % L = 0.2 % xxxx 534 103 = 10 k 103 = 10 k 535 For ohmic value For ohmic value range see range see electrical electrical specification specification PART NUMBER DESCRIPTION (for information only) 534- 1 2 103 203 xxxx OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL o o GANGS N 1 GANGS N 2 B: 1 S: 2 SINGLE SECTION DIMENSIONS in inches (millimeters) 0.015 0.031 0.750 (19.05) 0.812 (20.62) 0.015 0.312 (7.92) 0.030 MAX. (0.76) 0.062 (1.57) 0.200 MIN. (5.08) METRIC SHAFT: 534B...8872 2 1 3 BUSHING + 0.0000 MOUNT MODEL: 0.2497 (6.34)- 0.0003 + 0.0000 - 0.0020 0.015 534B/534-1 0.4062 0.875 (10.32) (22.22) + 0.000 0.010 - 0.0003 6.00 mm 0.032 x 0.032 (0.81) x (0.81) DP 3 / - 32UNEF - 2A 8 9 mm x 0.75 P SCREWDRIVER SLOT 0.031 0.015 0.850 (21.59) 0.375 (9.52) 0.062 (1.57) 0.057 (1.45) MIN. 30 R 0.625 MAX. 0.300 (7.62) MIN. 0.062 (1.57) (15.88) TYP. 2 1 3 + 0.0000 0.7500 (19.05) - 0.0005 SERVO MOUNT MODEL: + 0.0000 0.1248 (3.17) 0.015 - 0.0003 534S/534-2 0.875 (22.22) 2 CW 1 3 0.750 (19.05) MAX. 0.875 (22.22) SCHEMATIC Mounting hardware, washer and panel nut, nickel plated Revision: 17-May-2018 Document Number: 57065 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000