572D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES P case offers single-sided lead (Pb)-free terminations Wraparound lead (Pb)-free terminations: Q, S, A, B, and T cases 8 mm and 12 mm tape and reel packaging available per EIA-481 and reeling per IEC 60286-3 7 178 mm standard 13 330 mm available Images not to scale Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PERFORMANCE CHARACTERISTICS www.vishay.com/doc 40194 Capacitance Tolerance: 10 %, 20 % standard Operating Temperature: -55 C to +125 C Voltage Rating: 4 V to 35 V DC DC (above 85 C, voltage derating is required) Moisture Sensitivity Level 2a Capacitance Range: 2.2 F to 220 F ORDERING INFORMATION 572D 336 X0 6R3 A 2 T TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE CODE TERMINATION REEL SIZE AND TOLERANCE AT +85 C PACKAGING This is expressed in X0 = 20 % This is expressed in volts. To See Ratings 2 = 100 % tin T = tape and reel picofarads. The first two X9 = 10 % complete the three-digit and Case 4 = gold plated 7 178 mm reel digits are the significant block, zeros precede the Codes table W = 13 330 mm reel figures. The third is the voltage rating. A decimal number of zeros to point is indicated by an R follow. (6R3 = 6.3 V). Notes Preferred tolerance and reel sizes are in bold We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size DIMENSIONS in inches millimeters W L H AB C D CASE CODE L W H A B (MIN.) C D (REF.) 0.039 0.031 0.008 0.126 0.008 0.063 0.008 0.031 0.008 0.031 0.008 0.008 Q 3.2 0.2 1.6 0.2 0.8 0.2 0.8 0.2 1.0 0.8 0.2 0.2 0.126 0.012 0.063 0.012 0.039 0.008 0.031 0.012 0.035 0.031 0.012 0.008 S 3.2 0.3 1.6 0.3 1.0 0.2 0.8 0.3 0.2 0.9 0.8 0.3 0.035 0.031 0.012 0.126 0.012 0.067 0.012 0.051 0.012 0.031 0.012 0.008 A 3.2 0.3 1.7 0.3 1.3 0.3 0.8 0.3 0.9 0.8 0.3 0.2 0.130 0.012 0.106 0.012 0.067 0.012 0.031 0.012 0.035 0.043 0.012 0.008 B 3.3 0.3 2.7 0.3 1.7 0.3 0.8 0.3 0.2 0.9 1.1 0.3 0.039 0.043 0.008 0.138 0.008 0.106 0.008 0.039 0.008 0.031 0.008 0.008 T 3.5 0.2 2.7 0.2 1.0 0.2 0.8 0.2 1.0 1.1 0.2 0.2 0.087 0.012 0.049 0.012 0.039 0.008 0.024 0.012 0.019 0.031 0.012 0.008 P 2.2 0.3 1.25 0.3 1.0 0.2 0.6 0.3 0.8 0.3 0.2 0.5 Revision: 17-Jul-2018 Document Number: 40064 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 572D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 25 V 35 V 2.2 Q A 4.7 A / S 10 P P A 22 A / B / T 33 A / P / Q / S A / P / S 47 Q / S S 68 S B 100 A / B / S / T B / T 220 B / S / T B STANDARD RATINGS MAX. DF MAX. ESR MAX. RIPPLE MAX. DCL CAPACITANCE AT +25 C AT +25 C 100 kHz CASE CODE PART NUMBER AT +25 C (F) 120 Hz 100 kHz I RMS (A) (%) () (A) 4 V AT+85 C, 2.7 V AT +125 C DC DC 220 B 572D227(1)004B(2)(3) 8.8 16 0.2 0.63 220 S 572D227X0004S(2)(3) 8.8 25 0.8 0.26 220 T 572D227X0004T(2)(3) 8.8 26 0.6 0.37 6.3 V AT+85 C, 4 V AT +125 C DC DC 33 A 572D336(1)6R3A(2)(3) 2.1 8 0.8 0.29 33 P 572D336X06R3P(2)(3) 2.1 14 1.5 0.13 33 Q 572D336(1)6R3Q(2)(3) 2.1 10 2.0 0.17 33 S 572D336(1)6R3S(2)(3) 2.1 10 1.4 0.24 47 Q 572D476X06R3Q(2)(3) 3.0 10 1.1 0.22 47 S 572D476(1)6R3S(2)(3) 3.0 10 0.9 0.25 68 S 572D686(1)6R3S(2)(3) 4.3 12 0.9 0.26 100 A 572D107(1)6R3A(2)(3) 6.3 14 0.8 0.36 100 B 572D107(1)6R3B(2)(3) 6.3 14 0.4 0.45 100 S 572D107X06R3S(2)(3) 6.3 20 1.0 0.24 100 T 572D107(1)6R3T(2)(3) 6.3 14 0.6 0.36 220 B 572D227(1)6R3B(2)(3) 13.9 16 0.2 0.63 10 V AT+85 C, 7 V AT +125 C DC DC 10 P 572D106(1)010P(2)(3) 1.0 8 3.0 0.09 33 A 572D336(1)010A(2)(3) 3.3 10 0.8 0.29 33 P 572D336X0010P(2)(3) 3.3 25 4.0 0.08 33 S 572D336X0010S(2)(3) 3.3 10 1.1 0.23 47 S 572D476X0010S(2)(3) 4.7 14 1.1 0.23 68 B 572D686(1)010B(2)(3) 6.8 6 0.45 0.42 100 B 572D107(1)010B(2)(3) 10 14 0.4 0.45 100 T 572D107X0010T(2)(3) 10 18 0.5 0.40 16 V AT +85 C, 10 V AT +125 C DC DC 10 P 572D106(1)016P(2)(3) 1.6 10 4.0 0.08 22 A 572D226(1)016A(2)(3) 3.5 8 1.4 0.22 22 B 572D226(1)016B(2)(3) 3.5 6 0.5 0.45 22 T 572D226(1)016T(2)(3) 3.5 8 1.1 0.27 25 V AT +85 C, 17 V AT +125 C DC DC 2.2 Q 572D225(1)025Q(2)(3) 0.65 6 5.0 0.10 4.7 A 572D475(1)025A(2)(3) 1.2 8 2.8 0.15 4.7 S 572D475(1)025S(2)(3) 1.2 8 4.0 0.12 10 A 572D106(1)025A(2)(3) 2.5 10 3.5 0.15 35 V AT +85 C, 23 V AT +125 C DC DC 2.2 A 572D225(1)035A(2)(3) 0.8 6 3.0 0.12 Note Part number definitions: (1) Tolerance: for 10 % tolerance, specify X9 for 20 % tolerance, change to X0 (2) Termination: for 100 % tin specify 2, for gold plated specify 4 (3) Packaging code: for 7 reels specify T, for 13 reel specify W Revision: 17-Jul-2018 Document Number: 40064 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000