5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES Junction passivation optimized design passivated anisotropic rectifier technology T = 185 C capability suitable for high reliability J and automotive requirement Available in uni-directional polarity only 5000 W peak pulse power capability with a 10/1000 s waveform DO-214AB (SMCJ) Excellent clamping capability Very fast response time Low incremental surge resistance PRIMARY CHARACTERISTICS Meets MSL level 1, per J-STD-020, LF maximum peak V 10 V to 43 V WM of 260 C V 11.1 V to 52.8 BR AEC-Q101 qualified P (10 x 1000 s) 5000 W PPM Material categorization: for definitions of compliance P 6.5 W D please see www.vishay.com/doc 99912 T max. 185 C J Polarity Uni-directional MECHANICAL DATA Package DO-214AB (SMCJ) Case: DO-214AB (SMCJ) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 - halogen-free, RoHS-compliant, and TYPICAL APPLICATIONS AEC-Q101 qualified Use in sensitive electronics protection against voltage Base P/NHM3 X - halogen-free, RoHS-compliant and transients induced by inductive load switching and lighting AEC-Q101 qualified ( X denotes revision code e.g. A, B, .....) on ICs, MOSFET, signal lines of sensor units for consumer, Terminals: Matte tin plated leads, solderable per computer, industrial, automotive, and telecommunication. J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Peak pulse power dissipation with a 10/1000 s waveform (fig. 3) P 5000 W PPM (1) Peak power pulse current with a 10/1000 s waveform (fig. 1) I See next table A PPM Power dissipation on infinite heatsink, T = 50 C P 6.5 W M D Operating junction and storage temperature range T , T -65 to +185 C J STG Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A Revision: 18-Apr-16 Document Number: 89432 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 910005KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK PULSE DEVICE REVERSE CLAMPING (1) DEVICE V AT I CURRENT VOLTAGE LEAKAGE SURGE BR T MARKING LEAKAGE VOLTAGE TYPE (V) I V AT V CURRENT T WM WM CODE AT V AT I WM PPM (2) (mA) (V) T = 150 C I J PPM I (A) V (V) MIN. MAX. R C I (A) (A) D 5KASMC10A 5AX 11.1 12.3 1.0 10 20.0 500 294.1 17.0 5KASMC12A 5BE 13.3 14.7 1.0 12 10.0 300 251.3 19.9 5KASMC13A 5BG 14.4 15.9 1.0 13 10.0 300 232.6 21.5 5KASMC16A 5BP 17.8 19.7 1.0 16 2.0 50 192.3 26.0 5KASMC17A 5BR 18.9 20.9 1.0 17 2.0 50 181.2 27.6 5KASMC18A 5BT 20.0 22.1 1.0 18 2.0 50 171.2 29.2 5KASMC20A 5BV 22.2 24.5 1.0 20 2.0 50 154.3 32.4 5KASMC22A 5BX 24.4 26.9 1.0 22 2.0 50 140.8 35.5 5KASMC24A 5BZ 26.7 29.5 1.0 24 2.0 50 128.5 38.9 5KASMC26A 5CE 28.9 31.9 1.0 26 2.0 50 118.8 42.1 5KASMC28A 5CG 31.1 34.4 1.0 28 2.0 50 110.1 45.4 5KASMC30A 5CK 33.3 36.8 1.0 30 2.0 50 103.3 48.4 5KASMC33A 5CM 36.7 40.6 1.0 33 2.0 50 93.8 53.3 5KASMC36A 5CP 40.0 44.2 1.0 36 2.0 50 86.1 58.1 5KASMC40A 5CR 44.4 49.1 1.0 40 2.0 50 77.5 64.5 5KASMC43A 5CT 47.8 52.8 1.0 43 2.0 50 72.0 69.4 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Typical thermal resistance, junction to ambient R 100 C/W JA (2) Typical thermal resistance, junction to mount R 20.8 C/W JM Notes (1) Mounted on minimum recommended pad layout (2) Mounted on infinite heat sink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE (1) 5KASMC10AHM3/57 0.257 57 850 7 diameter plastic tape and reel (1) 5KASMC10AHM3/9A 0.257 9A 3500 13 diameter plastic tape and reel (1) 5KASMC10AHM3 A/H 0.257 H 850 7 diameter plastic tape and reel (1) 5KASMC10AHM3 A/I 0.257 I 3500 13 diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 18-Apr-16 Document Number: 89432 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000