5KASMC28AHM3_A/H Vishay

333 3 5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES Junction passivation optimized design passivated anisotropic rectifier technology T = 185 C capability suitable for high reliability J and automotive requirement Available in unidirectional polarity only 5000 W peak pulse power capability with a SMC (DO-214AB) 10/1000 s waveform Excellent clamping capability Cathode Anode Very fast response time Low incremental surge resistance LINKS TO ADDITIONAL RESOURCES Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C 3D Models AEC-Q101 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PRIMARY CHARACTERISTICS V 10 V to 43 V TYPICAL APPLICATIONS WM V 11.1 V to 52.8 BR Use in sensitive electronics protection against voltage P (10 x 1000 s) 5000 W PPM transients induced by inductive load switching and lightin g P 6.5 W on ICs, MOSFET, signal lines of sensor units for consumer, D computer, industrial, automotive, and telecommunication. T max. 185 C J Polarity Unidirectional MECHANICAL DATA Package SMC (DO-214AB) Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3 X - halogen-free, RoHS-compliant and AEC-Q101 qualified ( X denotes revision code e.g. A, B, .....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Peak pulse power dissipation with a 10/1000 s waveform (fig. 3) P 5000 W PPM (1) Peak power pulse current with a 10/1000 s waveform (fig. 1) I See next table A PPM Power dissipation on infinite heatsink, T = 50 C P 6.5 W M D Operating junction and storage temperature range T , T -65 to +185 C J STG Note (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2 A Revision: 19-Apr-2021 Document Number: 89432 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D 5KASMC10A thru 5KASMC43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM TYPICAL VOLTAGE MAXIMUM PEAK MAXIMUM TEST STAND-OFF REVERSE TEMP. (1) DEVICE V AT I REVERSE PULSE CLAMPING BR T DEVICE CURRENT VOLTAGE LEAKAGE COEFFICIENT MARKING (V) LEAKAGE SURGE VOLTAGE (3) TYPE I V AT V OF V T WM WM BR CODE AT V CURRENT AT I WM PPM (mA) (V) T = 150 C T J (2) I (A) I V (V) R PPM C MIN. NOM. MAX. I (A) (%/C) D (A) 5KASMC10A 5AX 11.1 11.7 12.3 1.0 10 20.0 500 294.1 17.0 0.069 5KASMC12A 5BE 13.3 14.0 14.7 1.0 12 10.0 300 251.3 19.9 0.074 5KASMC13A 5BG 14.4 15.2 15.9 1.0 13 10.0 300 232.6 21.5 0.076 5KASMC16A 5BP 17.8 18.8 19.7 1.0 16 2.0 50 192.3 26.0 0.081 5KASMC17A 5BR 18.9 19.9 20.9 1.0 17 2.0 50 181.2 27.6 0.082 5KASMC18A 5BT 20.0 21.1 22.1 1.0 18 2.0 50 171.2 29.2 0.083 5KASMC20A 5BV 22.2 23.4 24.5 1.0 20 2.0 50 154.3 32.4 0.085 5KASMC22A 5BX 24.4 25.7 26.9 1.0 22 2.0 50 140.8 35.5 0.086 5KASMC24A 5BZ 26.7 28.1 29.5 1.0 24 2.0 50 128.5 38.9 0.087 5KASMC26A 5CE 28.9 30.4 31.9 1.0 26 2.0 50 118.8 42.1 0.088 5KASMC28A 5CG 31.1 32.8 34.4 1.0 28 2.0 50 110.1 45.4 0.089 5KASMC30A 5CK 33.3 35.1 36.8 1.0 30 2.0 50 103.3 48.4 0.090 5KASMC33A 5CM 36.7 38.7 40.6 1.0 33 2.0 50 93.8 53.3 0.091 5KASMC36A 5CP 40.0 42.1 44.2 1.0 36 2.0 50 86.1 58.1 0.091 5KASMC40A 5CR 44.4 46.8 49.1 1.0 40 2.0 50 77.5 64.5 0.092 5KASMC43A 5CT 47.8 50.3 52.8 1.0 43 2.0 50 72.0 69.4 0.093 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) To calculate V vs. junction temperature, use the following formula: V at T = V at 25 C x (1 + T x (T - 25)) BR BR J BR J (4) All terms and symbols are consistent with ANSI/IEEE C62.35 THERMAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1) Typical thermal resistance, junction to ambient R 100 C/W JA (2) Typical thermal resistance, junction to mount R 20.8 C/W JM Notes (1) Mounted on minimum recommended pad layout (2) Mounted on infinite heat sink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE (1) 5KASMC10AHM3 A/H 0.257 H 850 7 diameter plastic tape and reel (1) 5KASMC10AHM3 A/I 0.257 I 3500 13 diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 19-Apr-2021 Document Number: 89432 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000