695D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated FEATURES Pad compatible with 194D and MIL-PRF-55365/4 (CWR06) Available 8 mm, 12 mm 16 mm tape to EIA-481 and reeling per IEC 286-3. 7 178 mm standard Available 13 330 mm available Terminations: 100 % tin (2) standard, tin / lead available Available Material categorization: PERFORMANCE CHARACTERISTICS for definitions of compliance please see www.vishay.com/doc 40194 www.vishay.com/doc 99912 Operating Temperature: -55 C to +125 C Note (above 85 C, voltage derating is required) * This datasheet provides information about parts that are Capacitance Range: 1.0 F to 270 F RoHS-compliant and / or parts that are non RoHS-compliant. For Capacitance Tolerance: 10 %, 20 % standard example, parts with lead (Pb) terminations are not RoHS-compliant. Voltage Rating: 4 V to 50 V Please see the information / tables in this datasheet for details DC DC Moisture Sensitivity Level 2a ORDERING INFORMATION 695D 475 X0 004 A 2 T TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE CODE TERMINATION REEL SIZE AND TOLERANCE AT +85 C PACKAGING This is expressed in X0 = 20 % This is expressed in volts. See Ratings 2 = 100 % tin T = tape and reel picofarads. The first X9 = 10 % To complete the three-digit and Case 4 = gold plated 7 178 mm reel two digits are the block, zeros precede the Codes table 8 = solder plated W = 13 330 mm reel significant figures. voltage rating. A decimal (60/40) See tape and reel The third is the point is indicated by an R Special order specifications number of zeros to (6R3 = 6.3 V). follow. Notes Preferred tolerance and reel sizes are in bold We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size DIMENSIONS in inches millimeters Tantalum wire nib identifie s anode (+) W terminal L MAX. B D J REF. J MAX. MAX. A H CASE CODE L (MAX.) D (REF.) W H A B J (MAX.) 0.134 0.100 0.050 0.015 0.050 0.015 0.023 0.010 0.067 0.015 0.004 A 3.4 2.54 1.27 0.38 1.27 0.38 0.584 0.25 1.70 0.38 0.10 0.185 0.150 0.050 0.015 0.050 0.015 0.040 0.015 0.120 0.015 0.004 B 4.7 3.81 1.27 0.38 1.27 0.38 1.02 0.38 3.05 0.38 0.10 0.185 0.140 0.095 0.015 0.050 0.015 0.040 0.015 0.110 0.020 0.004 D 4.7 3.56 2.41 0.38 1.27 0.38 1.02 0.38 2.79 0.51 0.10 0.236 0.200 0.095 0.015 0.050 0.015 0.040 0.015 0.170 0.020 0.004 E 6.0 5.08 2.41 0.38 1.27 0.38 1.02 0.38 4.32 0.51 0.10 0.256 0.220 0.135 0.015 0.070 0.015 0.040 0.015 0.185 0.020 0.004 F 6.5 5.59 3.43 0.38 1.78 0.38 1.02 0.38 4.70 0.51 0.10 0.300 0.260 0.100 0.015 0.100 0.015 0.040 0.015 0.220 0.020 0.004 G 7.6 6.60 2.54 0.38 2.54 0.38 1.02 0.38 5.59 0.51 0.10 0.303 0.265 0.150 0.015 0.110 0.015 0.050 0.015 0.220 0.020 0.004 H 7.7 6.73 3.81 0.38 2.79 0.38 1.27 0.38 5.59 0.51 0.10 Note The anode termination (D less B) will be a minimum of 0.25 mm (0.010 ). Revision: 17-Jul-2018 Document Number: 40038 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 695D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 4 V 6 V 10 V 15 V 20 V 25 V 35 V 50 V 0.10 A 0.15 A 0.22 AB 0.33 AB 0.47 AB D 0.68 AB D 1.0 AB D D 1.5 A B D D E 2.2 A B D E F 3.3 A B D D F F 4.7 A A B D D E F G 6.8 BBD D E F F H 10 B D D D F F G H 15 D D D E F G H 22 D D E F G H 33 E E F F G H 47 F F F G H 68 F F G H 100 F G G H 120 G G H 150 G H H 180 H H 220 H H 270 H STANDARD RATINGS MAX. DF MAX. ESR MAX. RIPPLE MAX. DCL CAPACITANCE AT +25 C AT +25 C 100 kHz CASE CODE PART NUMBER AT +25 C (F) 120 Hz 100 kHz I RMS (A) (%) () (A) 4 V AT +85 C 2.7 V AT +125 C DC DC 4.7 A 695D475(1)004A(2)(3) 0.5 6 11.000 0.07 6.8 B 695D685(1)004B(2)(3) 0.5 6 9.000 0.09 10 B 695D106(1)004B(2)(3) 0.5 6 8.500 0.09 15 D 695D156(1)004D(2)(3) 0.6 6 2.200 0.20 22 D 695D226(1)004D(2)(3) 0.9 6 2.000 0.21 33 E 695D336(1)004E(2)(3) 1.3 6 1.500 0.25 47 F 695D476(1)004F(2)(3) 1.9 6 1.000 0.33 68 F 695D686(1)004F(2)(3) 2.7 6 0.900 0.35 100 F 695D107(1)004F(2)(3) 4.0 8 0.900 0.35 120 G 695D127(1)004G(2)(3) 4.8 8 0.700 0.41 150 G 695D157(1)004G(2)(3) 6.0 8 0.650 0.43 180 H 695D187(1)004H(2)(3) 7.2 8 0.400 0.61 220 H 695D227(1)004H(2)(3) 8.8 8 0.350 0.65 270 H 695D277(1)004H(2)(3) 10.8 8 0.350 0.65 Note Part number definitions: (1) Tolerance: for 10 % tolerance, specify X9 for 20 % tolerance, change to X0 (2) Termination: for 100 % tin specify 2 for gold plated specify 4, for solder plated 60/40 specify 8 (3) Packaging code: for 7 reels specify T, for 13 reels specify W Revision: 17-Jul-2018 Document Number: 40038 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000