6KA24 www.vishay.com Vishay General Semiconductor PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES Junction passivation optimized design passivated anisotropic rectifier technology T = 185 C capability suitable for high J reliability and automotive requirement Excellent clamping capability Low leakage current High surge capability P600 Solder dip 275 C max. 10 s, per JESD 22-B106 AEC-Q101 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS V 24 V Use in sensitive electronics protection against voltage WM transients induced by inductive load switching and lighting, V 26.7 V to 32.6 V BR especially for automotive load dump protection application. P (10 x 1000 s) 6000 W PPM P (10 s/50 ms) 2000 W PPM MECHANICAL DATA P 6.5 W D Case: P600, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating I 90 A RSM Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified I 400 A FSM ( X denotes revision code e.g. A, B, .....) T max. 185 C J Terminals: Matte tin plated leads, solderable per Polarity Uni-directional J-STD-002 and JESD 22-B102 Package P600 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL LIMITUNIT (1) with 10/1000 s waveform 6000 Peak pulse power dissipation P W PPM (2) with 10s/50 ms waveform 2000 Power dissipation on infinite heatsink at T = 75 C (fig. 3) P 6.5 W L D Maximum working stand-off voltage V 24 V WM (3) Peak forward surge current 8.3 ms single half sine-wave I 400 A FSM Operating junction and storage temperature range T , T -65 to +185 C J STG Notes (1) Non-repetitive current pulse, per fig. 2, with a 10/1000s waveform (2) Non-repetitive current pulse, per fig. 5, with a 10 s/50 ms waveform (3) Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN VOLTAGE TEST CURRENT STAND-OFF VOLTAGE V AT I BR T DEVICE TYPE I V T WM (V) (mA) (V) MIN. MAX. 6KA24 26.7 32.6 100 24 Revision: 08-Nov-16 Document Number: 88309 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 910006KA24 www.vishay.com Vishay General Semiconductor ADDITIONAL CHARACTERISTICS (T = 25 C unless otherwise noted) A PARAMETER TEST CONDITIONS SYMBOL LIMIT UNIT T = 25 C 1.0 A Maximum DC reverse leakage current V = 24 V I A WM D T = 150 C 50 A T = 150 C min. 29.7 A Reverse breakdown voltage 100 mA V V BR T = 150 C max. 36.7 A T = 25 C 40 A (1) Maximum clamping voltage I = 90 A V V PP C T = 150 C 45 A (2) Maximum instantaneous forward voltage 100 A V 1.8 V F Notes (1) Measured on 80 s square pulse width (2) Measured on 300 s square pulse width ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE (1) 6KA24HE3 A/C 2.710 C 800 13 diameter paper tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (T = 25 C unless otherwise noted) A 100 150 T = 25 C J Non-Repetitive Pulse t = 10 s Pulse Width (t ) r d Waveform shown in Fig. 2 is defined as the Point T = 25 C A where the Peak Current Peak Value decays to 50 % of I PPM I PPM 100 Half Value - I 10 PP I 2 PPM 50 10/1000 s Waveform as defined by R.E.A. t d 1 0 1.0 s 10 s 100 s 1.0 ms 10 ms 100 ms 0 1.0 2.0 3.0 4.0 t - Pulse Width (s) t - Time (ms) d Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - 10/1000 s Pulse Waveform Revision: 08-Nov-16 Document Number: 88309 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I - Peak Pulse Current, % I PPM RSM P - Peak Pulse Power (kW) PPM