BRT11, BRT12, BRT13 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing FEATURES I = 300 mA TRMS High static dV/dt < 10 000 V/s Electrically insulated between input and output A 1 6 MT2 circuit Microcomputer compatible - very low trigger C 2 5 NC current Trigger current NC 3 4 MT1 - (I < 1.2 mA) BRT12F FT - (I < 2 mA) BRT11H, BRT12H, BRT13H FT - (I < 3 mA) BRT11M, BRT12M, BRT13M FT Non-zero voltage detectors high input sensitivity Compliant to RoHS Directive 2002/95/EC and in i179004-10 accordance to WEEE 2002/96/EC DESCRIPTION APPLICATIONS The BRT11, BRT12, and BRT13 product family consists of Industrial controls AC optocouplers non-zero voltage detectors consisting of Office equipment two electrically insulated lateral power ICs which integrate a Consumer appliances thyristor system, a photo detector and noise suppression at the output and an IR GaAs diode input. AGENCY APPROVALS UL 1577, file no. E52744 system code H DIN EN 60747-5-2 (VDE 0844)/DIN EN 60747-5-5 (pending) available with option 1 CQC ORDERING INFORMATION DIP-6 Option 6 B R T 1 x - X 0 T 10.16 mm PART NUMBER PACKAGE OPTION TAPE 7.62 mm AND Option 7 Option 9 REEL > 0.1 mm > 0.7 mm V (V) AGENCY DRM CERTIFIED/PACKAGE 400 600 800 UL I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA I = 2 mA I = 3 mA FT FT FT FT FT FT FT DIP-6 BRT11H BRT11M BRT12F BRT12H BRT12M BRT13H BRT13M DIP-6, 400 mil, option 6 - - BRT12F-X006 BRT12H-X006 - BRT13H-X006 - (1) (1) (1) SMD-6, option 7 - - BRT12F-X007T BRT12H-X007T - BRT13H-X007T - SMD-6, option 9 - - - BRT12H-X009T - BRT13H-X009T - UL, VDE I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA I = 2 mA I = 3 mA FT FT FT FT FT FT FT DIP-6 - - - BRT12H-X001 BRT12M-X001 - - DIP-6, option 6 - - BRT12F-X016 BRT12H-X016 BRT12M-X016 BRT13H-X016 - (1) SMD-6, option 7 - - - - - BRT13H-X017T - Note (1) Also available in tube, do not put T on the end. Rev. 1.6, 02-Dec-11 Document Number: 83689 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 BRT11, BRT12, BRT13 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 20 mA F Surge forward current I 1.5 A FSM Power dissipation t 10 s P 30 mW diss OUTPUT BRT11 V 400 V DRM Repetitive peak off-state voltage BRT12 V 600 V DRM BRT13 V 800 V DRM RMS on-state current I 300 mA TRMS Single cycle surge current 50 Hz I 3A TSM Power dissipation P 600 mW diss COUPLER Maximum power dissipation P 630 mW tot Isolation test voltage (between emitter and detector, climate V 5300 V ISO RMS (1) per DIN 500414, part 2, Nov. 74) Reference voltage in accordance V 500 V ref RMS with VDE 0110 b Reference voltage in accordance V 600 V ref DC with VDE 0110 b (insulation group C) Creepage distance 7.2 mm Clearance distance 7.2 mm Comparative tracking index per group IIIa according to CTI 175 DIN IEC 112/VDE 0303 part 1 DIN VDE 0109 12 V = 500 V, T = 25 C R 10 IO amb IO Isolation resistance 11 V = 500 V, T = 100 C R 10 IO amb IO Storage temperature range T - 40 to + 150 C stg Ambient temperature range T - 40 to + 100 C amb Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Test AC voltage in accordance with DIN 57883, June 1980. Rev. 1.6, 02-Dec-11 Document Number: 83689 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000