BRT21, BRT22, BRT23 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing FEATURES High input sensitivity I = 1 mA FT I = 300 mA TRMS High static dV/dt 10 000 V/s 1 6 MT2 A Electrically insulated between input and output C circuit 2 5 NC Microcomputer compatible 3 ZCC* 4 NC MT1 Trigger current - (I < 1.2 mA) BRT22F, BRT23F FT *Zero crossing circuit - (I < 2 mA) BRT21H, BRT22H, BRT23H FT - (I < 3 mA) BRT21M, BRT22M, BRT23M FT Available surface mount an d on tape and reel Zero voltage crossing detector 23128 Material categorization: for definitions of compliance click logo to get started please see www.vishay.com/doc 99912 DESIGN SUPPORT TOOLS APPLICATIONS Industrial controls Office equipment DESCRIPTION Consumer appliances The BRT21, BRT22, BRT23 product family consists of AC switch optocouplers with zero voltage detectors with two AGENCY APPROVALS electrically insulated lateral power ICs which integrate a thyrister system, a photo detector and noise suppression at UL 1577 the output and an IR GaAs diode input. cUL 1577 High input sensitivity is achieved by using an emitter DIN EN 60747-5-5 (VDE 0884-5) available with option 1 follower phototransistor and a SCR predriver resulting in an LED trigger current of less than 2 mA or 3 mA (DC). Inverse parallel SCRs provide commutating dV/dt greater than 10 kV/s. The zero cross line voltage detection circuit consists of two MOSFETS and a photodiode. The BRT21, BRT22, BRT23 product family isolates low-voltage logic from 120, 230, and 380 VAC lines to control resistive, inductive or capacitive loads including motors, solenoids, high current thyristors or TRIAC and relays. ORDERING INFORMATION Option 6 DIP-6 B R T 2 x - X 0 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE Option 7 Option 8 Option 9 AND REEL 9.27 mm > 0.7 mm > 0.1 mm V (V) DRM AGENCY CERTIFIED/PACKAGE 400 600 800 UL I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA FT FT FT FT FT FT FT FT DIP-6 BRT21H BRT21M BRT22F BRT22H BRT22M BRT23F BRT23H BRT23M DIP-6, 400 mil, BRT22F- BRT23F- BRT23H- -- -- - option 6 X006 X006 X006 BRT21H- BRT22F- BRT22H- BRT23F- BRT23H- BRT23M- SMD-6, option 7 - - (1) (1) (1) (1) X007 X007T X007T X007T X007T X007T BRT22F- BRT23F- SMD-6, option 9 - - -- -- (1) X009T X009T Rev. 1.9, 11-Jan-2019 Document Number: 83690 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 BRT21, BRT22, BRT23 www.vishay.com Vishay Semiconductors V (V) DRM AGENCY CERTIFIED/PACKAGE 400 600 800 UL, VDE I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA I = 1.2 mA I = 2 mA I = 3 mA FT FT FT FT FT FT FT FT BRT22F- BRT22H- BRT23H- DIP-6 - - -- - X001 X001 X001 BRT21H- BRT21M- BRT22F- BRT22H- BRT22M- BRT22H- BRT23M- DIP-6, option 6 - X016 X016 X016 X016 X016 X016 X016 BRT22F- BRT22H- SMD-6, option 7 - - -- -- (1) X017T X017 BRT23H- SMD-6, option 8 - - - - - - - X018T Note (1) Also available in tube, do not put T on the end ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage I = 10 A V 6V R R Forward current I 60 mA F Surge current I 2.5 A FSM Power dissipation P 100 mW diss Derate from 25 C 1.33 mW/C OUTPUT BRT21 V 400 V DRM Peak off-state voltage BRT22 V 600 V DRM BRT23 V 800 V DRM On state RMS current I 300 mA TRM Single cycle surge current 3A Power dissipation P 600 mW diss Derate from 25 C 6.6 mW/C COUPLER Storage temperature range T -40 to +150 C stg Ambient temperature range T -40 to +100 C amb Max. 10 s dip soldering Soldering temperature T 260 C sld 0.5 mm from case bottom Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability Rev. 1.9, 11-Jan-2019 Document Number: 83690 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000
