CCF02470RJKE36 Vishay

CCF02 (CCF-2) www.vishay.com Vishay Dale Metal Film Resistors, Industrial Power, Flameproof FEATURES Small size suitable for 1/2 W, 1 W and 2 W applications High power rating, small size Flameproof, high temperature coating meets EIA RS-325-A Excellent high frequency characteristics Low noise Low voltage coefficient Tape and reel packaging for automatic insertion (52.4 mm inside tape spacing per EIA-296-E) Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. STANDARD ELECTRICAL SPECIFICATIONS POWER MAXIMUM TEMPERATURE RESISTANCE GLOBAL HISTORICAL RATING WORKING TOLERANCE COEFFICIENT RANGE E-SERIES (1) MODEL MODEL P VOLTAGE % 70 C ppm/C W V 96 for 1 % tolerance CCF02 CCF-2 2.0 350 100 1, 5 4.99 to 1M 24 for 5 % tolerance Note (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS MATERIAL SPECIFICATIONS PARAMETER UNIT CCF02 Element Proprietary nickel-chrome film Rated Dissipation at 70 C W 2.0 Solderability Satisfactory per MIL-STD-202, Method 208. Maximum Working Voltage V 350 Core Fire-cleaned high purity ceramic Insulation Voltage (1 Min) V > 500 eff Standard lead material is solder-coated Dielectric Strength V 900 AC Termination copper. Solderable and weldable per 11 Insulation Resistance 10 MIL-STD-1276, Type C. Operating Temperature Range C - 65/+ 230 Terminal Strength (Pull Test) lb 2 MARKING -9 Failure Rate 10 /h < 1 Color code marking with 5 color bands for 1 % product and 4 color bands for 5 % product Weight (Max.) g 0.35 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CCF02301RFKR36 (preferred part numbering format) C C F 0 2 3 0 1 R F K R36 TEMPERATURE GLOBAL MODEL RESISTANCE VALUE T OLERANCE PACKA GING SPECIAL CODE COEFFICIENT CCF02 R = F = 1 % K = 100 ppm E36 = Lead (Pb)-free, Blank = Standard (Dash Number) J = 5 % T/R (2500 pieces) K = k (up to 3 digits) M = M R36 = Tin/Lead, From 1 to 999 4R99 = 4.99 T/R (2500 pieces) as applicable 680K = 680 k 1M00 = 1.0 M Historical Part Number example: CCF-23010F (will continue to be accepted) CCF-2 3 0 1 0 F R 3 6 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Note For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc 31544). Revision: 15-Nov-12 Document Number: 31012 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 CCF02 (CCF-2) www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.344 0.031 1.030 0.130 0.032 0.002 (8.74 0.79) (26.16 3.30) (0.81 0.05) 0.425 0.145 0.015 (10.80) (3.68 0.38) Max. 120 Surface temperatures 250 were taken with an 100 infrared pyrometer 200 in + 25 C still air. 80 150 Resistors were supported by their 60 leads in test clips at a 100 point 0.5 (12.70 mm) 40 out from the resistor 50 body ends. 20 0 12 3 4 5 0 APPLIED POWER (W) - 65 - 50 - 25 0 25 50 75 100 125 150 175 200 225 250 AMBIENT TEMPERATURE IN C 70 DERATING THERMAL RESISTANCE PERFORMANCE TEST MAX. R (TYPICAL TEST LOTS) Thermal Shock 1.0 % Short Time Overload 0.5 % Low Temperature Operation 0.5 % Moisture Resistance 1.5 % Resistance to Soldering Heat 0.5 % Shock 0.5 % Vibration 0.5 % Terminal Strength 0.5 % Dielectric Withstanding Voltage 0.5 % Life 2.0 % Revision: 15-Nov-12 Document Number: 31012 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN % HEAT RISE (C ABOVE AMBIENT)