CP000533R00JE66 Vishay

End of Life July 2020 CP High Volume www.vishay.com Vishay Dale Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead FEATURES High performance for low cost High power to size ratio Ceramic cases are available with circuit board stand-offs (designated with a ...3 model ending) Special cement potting compound and ceramic case provide high thermal conductivity in a fireproof package Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING RESISTANCE RANGE RESISTANCE RANGE WEIGHT GLOBAL TOLERANCE P (typical) 40 C MODEL % (1) (1) g W WIREWOUND METAL OXIDE CP0002 2 0.1 to 100 101 to 30K 5, 10 2.0 CP0003 3 0.1 to 100 101 to 33K 5, 10 3.4 CP0005 5 0.1 to 100 101 to 50K 5, 10 3.6 CP0005...3 5 0.1 to 100 101 to 50K 5, 10 4.8 CP0007 7 0.1 to 100 101 to 50K 5, 10 5.0 CP0007...3 7 0.1 to 100 101 to 50K 5, 10 6.8 CP0010 10 0.1 to 100 101 to 50K 5, 10 9.5 CP0010...3 10 0.1 to 100 101 to 50K 5, 10 9.9 CP0015 15 0.1 to 100 101 to 50K 5, 10 16.8 CP0020 20 0.1 to 100 101 to 50K 5, 10 22.8 TECHNICAL SPECIFICATIONS PARAMETER UNIT WIREWOUND CHARACTERISTICS METAL OXIDE CHARACTERISTICS Temperature Coefficient ppm/C 400 400 Short Time Overload - 5 x rated power for 5 s 5 x rated power for 5 s Terminal Strength lb 10 minimum 10 minimum Operating Temperature Range C -65 to +275 -65 to +225 Dielectric Withstanding Voltage V 1000 1000 AC 1/2 1/2 Maximum Working Voltage V (P x R) (P x R) GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: CP000515R00JE663 C P 0 0 051 5 R 00 J E 6 6 3 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical R = decimal J = 5.0 % E66 = lead (Pb)-free bulk pack (Dash number) Specifications Global K = thousand K = 10.0 % (Up to 3 digits) Model column for R1500 = 0.15 From 1 to 999 options) 1K500 = 1500 as applicable Revision: 05-Feb-2020 Document Number: 30113 1 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life July 2020 CP High Volume www.vishay.com Vishay Dale DIMENSIONS in inches millimeters CPxxxx CPxxxx...3 LD W LL L LL L H H H1 LD 0.125 3.18 W typical DIMENSIONS in inches millimeters GLOBAL MODEL (1) L W H H1 LD LL 0.060 1.5 0.040 1.0 0.040 1.0 0.060 1.5 0.002 0.05 0.120 3.0 CP0002 0.71 18 0.276 7 0.276 7 - 0.0256 0.65 1.378 35 CP0003 0.87 22 0.315 8 0.315 8 - 0.031 0.8 1.378 35 CP0005 0.87 22 0.394 10 0.354 9 - 0.031 0.8 1.378 35 CP0005...3 0.87 22 0.394 10 0.354 9 0.413 10.5 0.031 0.8 1.378 35 CP0007 1.38 35 0.394 10 0.354 9 - 0.031 0.8 1.378 35 CP0007...3 1.38 35 0.394 10 0.354 9 0.472 12 0.031 0.8 1.378 35 CP0010 1.89 48 0.394 10 0.354 9 - 0.031 0.8 1.378 35 CP0010...3 1.89 48 0.394 10 0.354 9 0.472 12 0.031 0.8 1.378 35 CP0015 1.89 48 0.492 12.5 0.453 11.5 - 0.031 0.8 1.378 35 CP0020 2.36 60 0.551 14 0.531 13.5 - 0.031 0.8 1.378 35 Notes (1) Potting compound may extend outside of ceramic case up to 0.060 1.52 maximum per side MATERIAL SPECIFICATIONS DERATING 120 Element: wirewound = copper-nickel alloy or nickel-chrome alloy, depending on resistance value 100 metal oxide = high temperature fired metal oxide film Core: wirewound = ceramic 80 metal oxide = ceramic 60 Body: steatite ceramic case with inorganic potting compound 40 Wirewound End Caps: tin plated steel Terminals: tinned copper 20 Metal oxide Part Marking: DALE, model, wattage, value, tolerance, date 0 code -55 -25 25 75 125 175 225 275 40 AMBIENT TEMPERATURE IN C PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS (EIA-344) Thermal Shock -55 C to +275 C (+225 C for metal oxide), 5 cycles, 30 min dwell time (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 V , for 1 min (2.0 % + 0.05 ) R RMS Low Temperature Storage -65 C, full rated working voltage for 45 min (3.0 % + 0.05 ) R Humidity 75 C, 90 % to 100 % RH, 240 h (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 25 C, 1.5 h ON, 0.5 h OFF (10.0 % + 0.05 ) R Terminal Strength 5 pounds for 30 s body twisted about axis, 3 x 360 rotations (2.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder at 1/8 to 3/16 from body (4.0 % + 0.05 ) R Revision: 05-Feb-2020 Document Number: 30113 2 For technical questions, contact: ww2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER IN %