CRA06P083330KJTA Vishay

End of Life - Last Available Purchase Date: 31-Dec-2019 CRA06P www.vishay.com Vishay Thick Film Chip Resistor Array FEATURES Concave terminal array with square corners 4 and 8 terminal package with isolated resistors Wide ohmic range: 10R to 1M0 AEC-Q200 qualified CRA06P thick film resistor array is constructed on a high Material categorization: for definitions of compliance grade ceramic body with concave terminations. A small please see www.vishay.com/doc 99912 package enables the design of high density circuits. The single component reduces board space, component counts and assembly costs. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING LIMITING ELEMENT TEMPERATURE RESISTANCE TOLERANCE MODEL CIRCUIT P VOLTAGE MAX. COEFFICIENT RANGE E-SERIES 70 C % ppm/K W V 100 1 24 + 96 0.063 50 10 to 1M CRA06P 03 200 2 5 24 Zero-Ohm-Resistor: R = 50 m, I = 1 A max. max. TECHNICAL SPECIFICATIONS CRA06P PARAMETER UNIT 03 CIRCUIT (2) Rated dissipation at 70 C W per element 0.063 (1) Limiting element voltage V 50 Insulation voltage (1 min) V peak 100 DC/AC Category temperature range C -55 to +155 9 Insulation resistance > 10 Notes (1) Rated voltage: P x R (2) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded PART NUMBER AND PRODUCT DESCRIPTION (1) Part Number: CRA06P08347K0JTA CR A0 6 P 0 8 3 4 7 K0TJA TERMINAL (2) MODEL PIN CIRCUIT VALUE TOLERANCE PACKAGING SPECIAL STYLE CRA06 P 04 3 = 03 R = decimal F = 1 % TA Up to 2 digits 08 K = thousand G = 2 % TC M = million J = 5 % 0000 = 0 jumper Z = 0 jumper Product Description: CRA06P 08 03 473 J RT1 e3 CRA06P 08 03 473 J RT1 e3 (4) MODEL TERMINAL COUNT CIRCUIT TYPE RESISTANCE VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE CRA06P 04 03 473 = 47 k F = 1 % RT1 e3 = pure tin 08 4702 = 47 k G = 2 % RT6 termination finish 10R0 = 10 J = 5 % 100 = 10 Z = 0 jumper 000 = 0 jumper First two digits (3 for 1 %) are significant. Last digit is the multiplier. Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to the table PACKAGING, see next page Revison: 24-Feb-2019 Document Number: 31047 1 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life - Last Available Purchase Date: 31-Dec-2019 CRA06P www.vishay.com Vishay PACKAGING PACKAGING CODE MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL PAPER TAPE PART NUMBER PRODUCT DESCRIPTION 180 mm/7 4 mm 5000 TA RT1 CRA06P 8 mm 330 mm/13 4 mm 20 000 TC RT6 CIRCUIT DERATING 120 03 CIRCUIT 100 80 60 40 20 0 4 pin 8 pin - 55 - 25 0 25 50 75 100 125 155 175 70 Ambient Temperature in C DIMENSIONS DIMENSIONS in millimeters PIN NO LA B C P T W A C 4 1.60 0.30 0.40 0.40 0.80 0.60 1.60 w 8 3.20 0.30 0.40 0.40 0.80 0.60 1.60 Tol. 0.20 0.20 0.15 0.20 - 0.10 0.15 PB T L SOLDER PAD DIMENSIONS in millimeters cw p a b WAVE 0.8 2.6 0.8 0.4 0.9 c w b p a Revison: 24-Feb-2019 Document Number: 31047 2 For technical questions, contact: thickfilmchip vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Rated Power in %