CRCW-HP e3
www.vishay.com
Vishay Draloric
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
Excellent pulse load capability
Enhanced power rating
Double side printed resistor element
AEC-Q200 qualified
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The pulse proof, high power thick film chip resistors series
APPLICATIONS
is the perfect choice for most fields of power measurement
Automotive
electronics where reliability, stability, high power rating and
Industrial
excellent pulse load performance are of major concern.
Typical applications include battery management systems
in automotive appliances.
TECHNICAL SPECIFICATIONS
CRCW0402- CRCW0603- CRCW0805- CRCW1206- CRCW1210- CRCW1218- CRCW2010- CRCW2512-
DESCRIPTION
HP e3 HP e3 HP e3 HP e3 HP e3 HP e3 HP e3 HP e3
Imperial size 0402 0603 0805 1206 1210 1218 2010 2512
Metric size code RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M
Resistance range 1 to 1 M jumper (0 )
Resistance tolerance 5 %; 1 %; 0.5 %
Temperature coefficient 200 ppm/K; 100 ppm/K
(1) (2) (3)
Rated dissipation, P 0.2 W 0.25 W 0.5 W 0.75 W 0.75 W 1.5 W 1.0 W 1.5 W
70
Operating voltage,
50 V 75 V 150 V 200 V 200 V 200 V 400 V 500 V
U AC /DC
max. RMS
Permissible film
155 C
(1)
temperature,
F max.
Operating temperature
-55 C to +155 C
range
Max. resistance change
at P for resistance
70
range, | R/R| after:
1000 h 2.0 %
8000 h 4.0 %
Permissible voltage
against ambient
(insulation):
1 min, U 75 V 100 V 200 V 300 V 300 V 300 V 300 V 300 V
ins
Notes
Marking: See document Surface Mount Resistor Marking (www.vishay.com/doc?20020).
(1)
Please refer to APPLICATION INFORMATION below.
(2)
CRCW0402-HP resistors feature a single side printed resistive layer only.
(3)
Specified power rating requires a thermal resistance of R = 110 K/W.
th
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 16-Sep-16 Document Number: 20043
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000CRCW-HP e3
www.vishay.com
Vishay Draloric
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW0402-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 3 A 10 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW0603-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 5 A 8 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW0805-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 6 A 5 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW1206-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 10 A 5 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW1210-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 12 A 4 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW1218-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 20 A 4 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW2010-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 12 A 5 m 0 -
max.
200 ppm/K 5 % 1 to 1 M E24
1 %
CRCW2512-HP e3 100 ppm/K 1 to 1 M E24; E96
0.5 %
Jumper, I = 16 A 5 m 0 -
max.
Note
The temperature coefficient of resistance (TCR) is not specified for 0 jumpers.
PACKAGING
PACKAGING
TYPE / SIZE CODE QUANTITY PACKAGING STYLE WIDTH PITCH
DIMENSIONS
ED = ET7 10 000 180 mm / 7"
CRCW0402-HP e3 2 mm
EE = EF4 50 000 330 mm / 13"
EI = ET2 5000 180 mm / 7"
ED = ET3 10 000 180 mm / 7"
2 mm
EL = ET4 20 000 285 mm / 11.25"
CRCW0603-HP e3 EE = ET8 20 000 330 mm / 13"
EA = ET1 5000 180 mm / 7"
EB = ET5 10 000 4 mm 285 mm / 11.25"
EC = ET6 20 000 Paper tape acc. to 330 mm / 13"
8 mm
IEC 60286-3, Type 1a
EA = ET1 5000 180 mm / 7"
CRCW0805-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25"
EC = ET6 20 000 330 mm / 13"
EA = ET1 5000 180 mm / 7"
CRCW1206-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25"
EC = ET6 20 000 330 mm / 13"
EA = ET1 5000 180 mm / 7"
CRCW1210-HP e3 EB = ET5 10 000 4 mm 285 mm / 11.25"
EC = ET6 20 000 330 mm / 13"
CRCW1218-HP e3 EK = ET9 4000 4 mm 180 mm / 7"
EF = E02 4000 4 mm 180 mm / 7"
CRCW2010-HP e3 Blister tape acc. to
EJ = E08 16 000 12 mm 4 mm 330 mm / 13"
IEC 60286-3, Type 2a
EG = E67 2000 8 mm
CRCW2512-HP e3 180 mm / 7"
EH = E82 4000 4 mm
Revision: 16-Sep-16 Document Number: 20043
2
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000