DG2034E www.vishay.com Vishay Siliconix Power Down Fault Protected, 1.8 V to 5.5 V, 2.5 , 4-Channel (4:1) Multiplexer DESCRIPTION FEATURES The DG2034E is a four-channel multiplexer that operates 2.5 switch on-resistance with a single 1.8 V to 5.5 V power supply. It features power 7 pF source-off capacitance down fault protection that prevents excessive current flow 27 pF comm-off capacitance when V+ is to ground. 33 pF comm-on capacitance The devices low power dissipation and wide voltage range 13 ns turn-on time make it ideal for use in battery powered products. The ultra low capacitance and charge injection of the switch make it -2 pC charge injection an ideal solution for data acquisition and sample and hold -67 dB off-isolation at 1 MHz applications, where low glitch and fast settling are required. -71 dB crosstalk at 1 MHz Low switch resistance and fast switching speeds, together 166 MHz bandwidth with high signal bandwidth, make the DG2034E suitable for video signal switching. 8 kV ESD / HBM The DG2034E switches one of four inputs to a common 400 mA latch-up current output as determined by the 3-bit binary address lines: A0, A1, and EN. Each switch conducts equally well in both BENEFITS directions when on, blocks input voltages up to the supply Power down fault protection level when off, and exhibits break before make switching Low parasitic and charge injection action. Wide operation voltage range The devices high ESD and latch-up current capability make it more reliable in designs where the part sits close to the High ESD tolerance interface. APPLICATIONS The DG2034E is available in MSOP10 and QFN12 3 mm x 3 mm packages. Automatic test equipment Process control and automation Data acquisition systems Meters and instruments Medical and healthcare systems Communication systems Audio and video switching Relay replacements FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION 12-Pin QFN (3 mm x 3 mm) A0 NC A1 12 11 10 MSOP-10 Logic A0 A1 Logic 1 10 S1 S2 1 9 S1 S2 2 9 GND COM 2 8 GND COM 3 8 S3 S4 4 7 S3 S4 3 7 EN V+ 5 6 456 Top View EN NC V+ Top View S17-0388-Rev. A, 20-Mar-17 Document Number: 73172 1 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000DG2034E www.vishay.com Vishay Siliconix TRUTH TABLE ORDERING INFORMATION A1 A0 EN ON SWITCH TEMP. RANGE PACKAGE PART NUMBER XX 0 None MSOP-10 DG2034EDQ-T1-GE3 -40 C to +85 C 001 S1 12-pin QFN DG2034EDN-T1-GE4 (3 mm x 3 mm) 011 S2 101 S3 111 S4 ABSOLUTE MAXIMUM RATINGS PARAMETER LIMIT UNIT Referenced V+ to GND -0.3 to +6 V a A , EN, S , COM -0.3 to (V+ + 0.3) X X Continuous current (any terminal) 50 mA Peak current (pulsed at 1 ms, 10 % duty cycle) 100 c QFN-12 (3 mm x 3 mm) 1295 b Power dissipation (package) mW d MSOP-10 320 Storage temperature (D suffix) -65 to +150 C ESD / HBM EIA / JESD22-A114-A 8k V ESD / CDM EIA / JESD22-C101-A 2k Latch up JESD78 400 mA Notes a. Signals on S , COM, EN or A exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings X X b. All leads welded or soldered to PC board c. Derate 16.2 mV/C above 70 C d. Derate 4 mV/C above 70 C S17-0388-Rev. A, 20-Mar-17 Document Number: 73172 2 For technical questions, contact: powerictechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000