DG2735A www.vishay.com Vishay Siliconix Low Voltage, 0.6 , Dual SPDT Analog Switch DESCRIPTION FEATURES The DG2735A is a low voltage, low on-resistance, Low voltage operation (1.65 V to 5.5 V) dual single-pole/double-throw (SPDT) monolithic CMOS Low on-resistance - R : 0.5 at 2.7 V ON analog switch designed for high performance switching of Fast switching: t = 55 ns at 2.7 V ON analog signals. Combining low-power, high speed, low T = 15 ns at 2.7 V OFF on-resistance, and small package size, the DG2735A, is ideal for portable and battery powered applications. Latch-up current > 400 mA (JESD78) The DG2735A has an operation range from 1.65 V to 5.5 V Material categorization: for definitions of compliance single supply. The DG2735A has two separate control pins please see www.vishay.com/doc 99912 for independent control of the two SPDT switches. BENEFITS The DG2735A is guaranteed 1.65 V logic compatible, allowing easy interface with low voltage DSP or MCU control Reduced power consumption logic and ideal for one cell Li-ion battery direct power. High accuracy The switch conducts signals within the power rails equally Reduce board space well in both directions when on, and blocks up to the power TTL/1.65 V logic compatible supply level when off. Break-before-make is guaranteed. The DG2735A is built on Vishay Siliconix s sub micron APPLICATIONS CMOS low voltage process technology and provides Cellular phones greater than 400 mA latch-up protection, as tested per Speaker headset switching JESD78A. Audio and video signal routing As a committed partner to the community and the environment, Vishay Siliconix manufactures this product PCMCIA cards with lead (Pb)-free device terminations. DG2735A is Battery operated systems offered in a miniQFN package. The miniQFN package Portable media players has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free -GE4 suffix. The Handheld test instruments nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL ratings. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2735A miniQFN-10L 7 6 (Top View) 5 NC1 IN2 8 Hx COM2 4 IN1 9 Pin 1 NO2 10 3 COM1 Note: Pin 1 has long lead 1 2 Pin 1: LONG LEAD Device Marking: Hx for DG2735A x = Date/Lot Traceability Code TRUTH TABLE LOGIC NC1, 2 NO1, 2 0ON OFF 1OFF ON S16-0650-Rev. C, 18-Apr-16 Document Number: 67590 1 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 V+ NC2 NO1 GNDDG2735A www.vishay.com Vishay Siliconix ORDERING INFORMATION PART NUMBER CONFIGURATION SWITCH FUNCTION TEMP. RANGE PACKAGE REEL QUANTITY miniQFN10, DG2735ADN-T1-GE4 Dual DPST NC / NO -40 C to +85 C 3000 1.4 mm x 1.8 mm ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER SYMBOL LIMITUNIT V+ -0.3 V to +6 V Reference to GND V a IN, COM, NC, NO -0.3 V to (V+ + 0.3) Current (Any terminal except NO, NC or COM) 30 Continuous Current (NO, NC, or COM) 300 mA Peak Current (Pulsed at 1 ms, 10 % duty cycle) 500 Storage Temperature (D Suffix) -65 to +150 C b c Power Dissipation (Packages) miniQFN10 208 mW Latch Up Current JESD78A >400 mA ESD - HBM ANSI / ESDA / JEDEC JS-001 >5000 ESD - CDM JESD22-C101 >1000 V ESD - MM JESD22-A115 >200 Notes a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 4 mW/C above 70 C. SPECIFICATIONS (V+ = 3 V) LIMITS TEST CONDITIONS a -40 C to +85 C PARAMETER SYMBOL UNLESS OTHERWISE SPECIFIED TEMP. UNIT e b c b V+ = 3 V, 10 %,V = 0.4 V or 1.65 V IN MIN. TYP. MAX. Analog Switch d Analog Signal Range V R Full 0 - V+ V analog DS(on) V+ = 2.7 V, I = 100 mA, V = 0.5 V NO/NC COM Room - 0.5 0.7 V+ = 2.7 V, I = 100 mA, V = 1.5 V NO/NC COM V+ = 2.7 V, I = 100 mA, V = 0.5 V NO/NC COM Full - 0.6 - V+ = 2.7 V, I = 100 mA, V = 1.5 V NO/NC COM On-Resistance R DS(on) V+ = 5.5 V, I = 100 mA, V = 0.9 V 0.3 NO/NC COM Room - 0.5 V+ = 5.5 V, I = 100 mA, V = 2.5 V 0.25 NO/NC COM V+ = 5.5 V, I = 100 mA, V = 0.9 V NO/NC COM Full - 0.4 - V+ = 5.5 V, I = 100 mA, V = 2.5 V NO/NC COM V+ = 2.7 V, I = 100 mA, NO/NC V = 0.5 V, 1.5 V COM d R Match R Room - 0.06 0.08 ON ON V+ = 5.5 V, I = 100 mA, NO/NC V = 0.9 V, 2.5 V COM R V+ = 2.7 V, I = 100 mA, d ON NO/NC R resistance flatness Room - - 0.15 ON flatness V = 0.5 V, 1.5 V COM Room -8 - 8 I NO/NC(off) Full -50 - 50 Switch Off Leakage V+ = 5 V, V = 0.5 V/4.5 V, NO/NC Current V = 4.5 V/0.5 V COM Room -8 - 8 I nA COM(off) Full -50 - 50 -10 - 10 Channel-On Leakage Room I V+ = 5 V, V = V = 4.5 V/0.5 V COM(on) NO/NC COM Current Full -50 - 50 S16-0650-Rev. C, 18-Apr-16 Document Number: 67590 2 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000