DG2750 www.vishay.com Vishay Siliconix 0.45 , Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION FEATURES The DG2750 is a dual SPDT low on-resistance switch 1.6 V to 5.5 V single power rail operation designed to from a single 1.6 V to 5.5 V power supply. It is a Capable to switch negative swing audio without bi-directional switch, and is capable of switching negative DC blocking capacitor swing audio without the need for a coupling capacitor. With Low signal distortion: THD+N < -98 dB a single power supply, the audio signal can swing over the Low on-resistance range from ((V+) - 5) to V+. 1.4 V high logic Guaranteed to operate with 1.4 V logic when V+ is in the range of 2.7 V to 5.5 V, the DG2750 will allow an easy Latch-up current > 600 mA (JESD78) interface with low voltage DSP or ASIC control logic. ESD (HBM): 8 kV The DG2750 is built on sub micron CMOS low voltage Reduced power consumption process technology, has very low quiescent current, and Reduce board space provides greater than 600 mA latch-up protection, as tested Material categorization: for definitions of compliance per JESD78. please see www.vishay.com/doc 99912 The DG2750 is assembled in compact mQFN10, 1.4 mm x 1.8 mm x 0.55 mm and ultra thin UTMQFN of APPLICATIONS 0.35 mm thickness. Cellular phones As a committed partner to the community and the Portable media players environment, Vishay Siliconix manufactures this product with lead (Pb)-free device termination. The miniQFN-10 Computer and game machine package has a nickel-palladium-gold device termination Handheld healthcare and instruments and is represented by the lead (Pb)-free -E4 suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and MSL rating. As a further sign of Vishay Siliconixs commitment, the DG2750 is fully RoHS-complaint and halogen-free. FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION miniQFN-10L 7 6 1 8 5 NC1 IN2 2 COM2 9 4 IN1 COM1 NO2 10 3 Ux 1 2 Pin 1: LONG LEAD Pin 1 Device Marking: Ux for DG2750 Top View x = Date/Lot Traceability Code S17-0426-Rev. G, 20-Mar-17 Document Number: 64736 1 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 V+ NC2 NO1 GNDDG2750 www.vishay.com Vishay Siliconix ORDERING INFORMATION PART NUMBER TEMPERATURE RANGE PACKAGE SIZE DG2750DN-T1-E4 miniQFN-10 1.4 mm x 1.8 mm x 0.55 mm -40 C to +85 C DG2750DN1-T1-GE4 UTMQFN-10 1.4 mm x 1.8 mm x 0.35 mm TRUTH TABLE, DG2750 IN1 (PIN 4) IN2 (PIN 8) FUNCTION 0 X COM1 = NC1 1X COM1 = NO1 X 0 COM2 = NC2 X1 COM2 = NO2 ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER LIMIT UNIT V+, IN -0.3 to +6 Reference to GND V a COM, NO, NC (V+) -5.5 or -2.5 whichever higher, (V+ + 0.3) Current (Any Terminal except COM, NO, NC, IN) 30 Continuous Current (COM, NO, NC, IN) 250 mA Peak Current (Pulsed at 1 ms, 10 % Duty Cycle) 500 Storage Temperature (D Suffix) -65 to +150 C b c Power Dissipation (Packages) miniQFN-10 208 mW ESD (Human Body Model) I/O to GND 8 kV Latch-up (per JESD78) 600 mA Notes a. Signals on COM, NO, NC, exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings b. All leads welded or soldered to PC board c. Derate 2.6 mW/C above 70 C SPECIFICATIONS (V+ = 2.7 V, 10 %) LIMITS TEST CONDITIONS a -40 C to +85 C PARAMETER SYMBOL TEMP. UNIT OTHERWISE UNLESS SPECIFIED b c b MIN. TYP. MAX. Analog Switch d Analog Signal Range V Full -2.5 - V+ V ANALOG Room - 0.45 1 On-Resistance R DS(on) V+ = 2.7 V, Full - - 1.3 V = ((V+) -4.5 V, -1 V, 0 V, 1 V, 2 V, V+), S On-Resistance Match R Room - 0.1 - ON I = 100 mA S On-Resistance Flatness R Flatness Room - 0.3 - ON I Room - 50 - NO/NC(off) Switch Off Leakage Current V+ = 2.7 V, I Full -250 - 250 COM(off) V = -2.5 V or 2.5 V, nA NC/NO Room - 50 - V = 2.5 V or -2.5 V COM Channel On Leakage Current I COM(on) Full -250 - 250 Digital Control Input Voltage High V Full 1.4 - - INH V+ = 2.7 V to 4.3 V V Input Voltage Low V Full - - 0.6 INL Input Capacitance C Room - 6.5 - pF IN Input Current I or I V = 0 or V+ Full -1 - 1 A INL INH IN S17-0426-Rev. G, 20-Mar-17 Document Number: 64736 2 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000