DG411LE, DG412LE, DG413LE www.vishay.com Vishay Siliconix 16 , Low Parasitic Capacitance and Leakage, +12 V / +5 V / +3 V / 5 V Quad SPST Switches DESCRIPTION FEATURES 3 V to 16 V single supply or 3 V to 8 V dual The DG411LE, DG412LE, and DG413LE are monolithic supply quad single-pole-single-throw analog switches. The Available On-resistance R : 16 DS(on) DG411LE and DG412LE differ only in that they respond to Low parasitic capacitance: Available opposite logic levels. The DG413LE has two normally open C : 15 pF D(ON) and two normally closed switches. It can be given variou s C : 5 pF S(OFF) configurations, including four SPST, two SPDT, and one Less than 8 pC charge injection over the full signal swin g DPDT. range The DG411LE, DG412LE, and DG413LE offer low on Fast switching t : 16 ns ON resistance of 16 , low parasitic capacitance of 15 pF t : 9 ns OFF switch on capacitance, and low charge injection over th e TTL, CMOS compatible signal swing range. Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 The DG411LE, DG412LE, and DG413LE operate on single Note and dual supplies. Single supply voltage ranges from 3 V * This datasheet provides information about parts that are to 16 V while dual supply operation is recommended with RoHS-compliant and / or parts that are non RoHS-compliant. For 3 V to 8 V. Each switch conducts equally well in both example, parts with lead (Pb) terminations are not RoHS-compliant. direction when on, and blocks input voltages up to the Please see the information / tables in this datasheet for details supply levels when off. BENEFITS The DG411LE, DG412LE, and DG413LE are available in Wide operation voltage range 16 lead TSSOP, SOIC, and PDIP packages. Low signal errors and distortion Fast switching time Minimized switching glitch APPLICATIONS Automatic test equipment Data acquisition systems Meters and instruments Medical and healthcare systems Communication systems Audio and video signal routing Relay replacement Battery powered systems Computer peripherals Audio and video signal routing FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG411LE, DG412LE DG413LE Dual-In-Line, TSSOP and SOIC Dual-In-Line, TSSOP and SOIC IN IN 1 16 1 2 IN 1 16 IN 1 2 D D 2 15 2 1 D 2 15 D 1 2 S 3 14 S 1 2 S 3 14 S 1 2 V- 4 13 V+ V- V+ 4 13 GND 5 12 V L GND 5 12 V L S S 6 11 3 4 S S 6 11 4 3 D 7 10 D 4 3 D 7 10 D 4 3 IN 8 9 IN 4 3 IN 8 9 IN 4 3 Top View Top View S19-0672-Rev. B, 05-Aug-2019 Document Number: 78091 1 For technical questions, contact: analogswitchsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DG411LE, DG412LE, DG413LE www.vishay.com Vishay Siliconix TRUTH TABLE TRUTH TABLE LOGIC DG411LE DG412LE LOGIC SW , SW SW , SW 1 4 2 3 0ON OFF 0OFF ON 1OFF ON 1ON OFF Logic 0 0.8 V Logic 0 0.8 V Logic 1 2.4 V Logic 1 2.4 V ORDERING INFORMATION TEMP. RANGE CONFIGURATION PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY DG411LEDQ-GE3 Tube 360 units 16-pin TSSOP DG411LEDQ-T1-GE3 Tape and reel, 3000 units DG411LE DG411LEDY-GE3 Tube 500 units 16-pin SOIC DG411LEDY-T1-GE3 Tape and reel, 2500 units 16-pin PDIP DG411LEDJ-GE3 Tube 500 units DG412LEDQ-GE3 Tube 360 units 16-pin TSSOP DG412LEDQ-T1-GE3 Tape and reel, 3000 units -40 C to +85 C DG412LE DG412LEDY-GE3 Tube 500 units Lead-free 16-pin SOIC DG412LEDY-T1-GE3 Tape and reel, 2500 units 16-pin PDIP DG412LEDJ-GE3 Tube 500 units DG413LEDQ-GE3 Tube 360 units 16-pin TSSOP DG413LEDQ-T1-GE3 Tape and reel, 3000 units DG413LE DG413LEDY-GE3 Tube 500 units 16-pin SOIC DG413LEDY-T1-GE3 Tape and reel, 2500 units 16-pin PDIP DG413LEDJ-GE3 Tube 500 units ABSOLUTE MAXIMUM RATINGS PARAMETER LIMIT UNIT V+ to V- -0.3 to +18 GND to V- 18 V V (GND -0.3) to (V+) +0.3 L -0.3 to (V+) +0.3 a I , V , V N S D or 30 mA, whichever occurs first Continuous Current (Any terminal) 30 mA Peak Current, S or D (Pulsed 1 ms, 10 % duty cycle) 100 (DQ, DY suffix) -65 to +125 Storage Temperature C (AK suffix) -65 to +150 c 16-pin TSSOP 450 b d Power Dissipation (Packages) 16-pin SOIC 650 mW e 16-pin CerDIP 900 ESD Human Body Model (HBM) per ANSI / ESDA / JEDEC JS-001 2500 V Latch Up Current, per JESD78D 400 mA Notes a. Signals on S , D , or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings X X X b. All leads welded or soldered to PC board c. Derate 7 mW/C above 75 C d. Derate 7.6 mW/C above 75 C e. Derate 12 mW/C above 75 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S19-0672-Rev. B, 05-Aug-2019 Document Number: 78091 2 For technical questions, contact: analogswitchsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000