DG467, DG468 Vishay Siliconix Low Power, High Voltage SPST Analog Switches DESCRIPTION FEATURES 15 V Analog Signal Range The DG467 and DG468 are dual supply single-pole/single- On-Resistance - R : 10 max. DS(on) throw (SPST) switches. On resistance is 10 max. and Fast Switching Action - T : 100 ns ON flatness is 2 max. over the specified analog signal range. V Logic Supply Not Required L These analog switches were designed to provide high TTL CMOS Input Compatible speed, low error switching of precision analog signals. The Rail To Rail Signal Handling primary application areas are in the routing and switching in Dual Or Single Supply Operation telecommunications and test equipment. Combining low Material categorization: For definitions of compliance power, low leakages, low on-resistance and small physical please see www.vishay.com/doc 99912 size, the DG467/468 are also ideally suited for portable and battery powered industrial and military equipment. BENEFITS Wide Dynamic Range The DG467 has one normally closed switch, while the Low Signal Errors and Distortion DG468 switch is normally open. They operate either from a Break-Befor-Make Switching Action single + 7 V to 36 V supply or from dual 4.5 V to 20 V Simple Interfacing supplies. They are offered in the very popular, small TSOP6 Reduced Board Space Improved Reliability package. APPLICATIONS Precision Test Equipment Precision Instrumentaion Communications Systems PBX, PABX Systems Audio Equipment Redundant Systems PC Multimedia Boards Hard Disc Drivers FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG467 TRUTH TABLE Logic DG467 DG468 1 6 NC COM 0 ON OFF 1OFF ON V+ V- 2 5 Logic0 0.8 V Logic1 2.4 V 3 4 IN GND Device Marking: TSOP6 DG467DV = G7xxx DG468DV = G8xxx DG468 NO 1 6 COM V+ V- 2 5 IN 3 4 GND TSOP6 Document Number: 74413 www.vishay.com For technical questions, contact: analogswitchtechsuoort vishay.com S12-2269Rev. D, 24-Sep-12 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000DG467, DG468 Vishay Siliconix ORDERING INFORMATION Temp Range Package Part Number DG467/DG468 DG467DV-T1-E3 - 40 C to 85 C 6-Pin TSOP DG468DV-T1-E3 ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A Parameter Referenced To V- Symbol Limit Unit V+ 44 GND 25 V (V-) - 2 to (V+) + 2 a Digital Inputs , V , V NO/NC COM or 30 mA, whichever occurs first 30 Current, (Any Terminal) Continuous mA Current (NO or NC or COM) Pulsed at 1 ms, 10 % duty cycle 100 Storage Temperature - 65 to 150 C b c 570 mW Power Dissipation (Package) 6-Pin TSOP Notes: a. Signals on NO, NC, COM, or IN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC Board. c. Derate 7 mW/C above 70 C. www.vishay.com Document Number: 74413 For technical questions, contact: analogswitchtechsuoort vishay.com 2 S12-2269Rev. D, 24-Sep-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000