DGQ2788A www.vishay.com Vishay Siliconix Automotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37 , 338 MHz Bandwidth DESCRIPTION FEATURES The DGQ2788A, is a four-channel single-pole double-throw 1.8 V to 5.5 V single supply operation (SPDT) analog switch with two control inputs. It is also Low resistance: 0.37 /typ. at 2.7 V known as a two-channel double-pole double-throw (DPDT) Highly flat and matched R ON configuration. The part is designed to operate from 1.8 V to Low parasitic capacitance, 5.5 V single power rail. All switches conduct equally well in C = 26 pF, C = 14.5 pF ON OFF both directions, offering rail to rail signal switching and can High bandwidth: 338 MHz be used both as multiplexers as well as de-multiplexers. 0.1 ns/typ. propagation delay for rail to rail fast The DGQ2788A offers low parasitic capacitance and highly edge pulsing signal matched low and flat switch resistance over the full signal Guaranteed logic high 1.2 V, logic low 0.3 V range. It features break-before-make switching and low Break before make switching control logic threshold. The part supports rail to rail fast edge pulsing signals and have 0.1 ns/typ. propagation Signal swing over V+ capable delay. It is ideal for both analog and digital signal switching Power down protection in space constrain applications requiring high performance Latch up current: 300 mA (JESD78) and efficient use of board space. Material categorization: for definitions of compliance The DGQ2788A comes in a small miniQFN-16 lead package please see www.vishay.com/doc 99912 of 2.6 mm x 1.8 mm x 0.55 mm. BENEFITS This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is Low and flat resistance suitable for use in automotive applications. High bandwidth Low parasitic capacitance Fault protection APPLICATIONS Automotive infotainment Audio, video, and bus routing Industrial automation Medical imaging Network and telecommunication FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION TRUTH TABLE 3xx LOGIC NC1, 2, 3 and 4 NO1, 2, 3 and 4 Pin 1 0On Off Device marking: 3xx 1Off On xx = date / lot traceability code Note: pin 1 has long lead ORDERING INFORMATION TEMPERATURE RANGE PACKAGE PART NUMBER MIN. ORDER / PACK. QUANTITY -40 C to +125 C lead (Pb)-free miniQFN-16 DGQ2788AEN-T1-GE4 Tape and reel, 3000 units S19-0381-Rev. C, 29-Apr-2019 Document Number: 75683 1 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DGQ2788A www.vishay.com Vishay Siliconix ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A PARAMETER SYMBOL LIMITUNIT V+ -0.3 to +6 Reference to GND V a IN, COM, NC, NO -0.3 to (V+ + 0.3) Current (any terminal except NO, NC, or COM) 30 Continuous current (NO, NC, or COM) 300 mA Peak current (pulsed at 1 ms, 10 % duty cycle) 500 Storage temperature (D suffix) -65 to +150 C d Package solder reflow conditions miniQFN-16 250 b c Power dissipation (packages) miniQFN-16 525 mW Latch-up, per AEC Q100-004 300 mA ESD human body model, per AEC Q100-002 2000 V ESD charged device model, per AEC Q100-011 1500 Notes a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings b. All leads welded or soldered to PC board c. Derate 6.6 mW/C above 70 C d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lea d terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection S19-0381-Rev. C, 29-Apr-2019 Document Number: 75683 2 For technical questions, contact: analogswitchtechsupport vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000