EB8 www.vishay.com Vishay Dale Edgeboard Connectors, Dual Readout FEATURES 0.156 C-C x 0.200 grid (3.96 mm x 5.08 mm) Greater design latitude 3 body materials: diallyl phthalate, phenolic and glass-filled polyester 6 contact termination styles, 8 body sizes, 7 mounting styles Bifurcated bellows contacts provide 2 flexing contact surfaces to assure positive contact Accepts PC board thickness of 0.054 to 0.071 (1.37 mm ELECTRICAL SPECIFICATIONS to 1.80 mm) Current Rating: 5 A Polarization between contact positions in all sizes Test Voltage Between Contacts: Selective gold plating At sea level: 1800 V RMS At 70 000 feet (21 336 meters): 450 V RMS APPLICATIONS Insulation Resistance: 5000 M minimum at 500 V DC For use with 0.062 (1.57 mm) printed circuit boards requiring potential an edgeboard type connector on 0.156 (3.96 mm) centers Contact Resistance: 30 mV maximum at rated current (with gold plating) MATERIAL SPECIFICATIONS Operating Temperature: -55 C to +125 C Body: Humidity: 96 h at 90 % relative humidity at +40 C, dried at 1 glass-filled diallyl phtalate per MIL-M-14, type SDG-F room temperature for 3 h minimum, insulation resistance green, flame retardant (UL 94 V-0) was greater than 5000 M 2 glass-filled phenolic per MIL-M-14, type MFH dark green, Durability: (with gold plating) after 500 cycles of insertion and withdrawal of a 0.070 (1.78 mm) thick steel test flame retardant (UL 94 V-0) gauge, contact resistance less than 0.030 V at 5 A and 3 thermoplastic polyester, glass-filled, black, flame individual contact retention force when measured with 0.054 retardant (UL 94 V-0) (1.37 mm) thick steel test slug greater than oz. 5 thermoplastic polyphenylene sulfied, glass-filled, brown, Shock: three 50G shocks in each of 3 mutually flame retardant (UL 94 V-0) perpendicular planes with no loss of continuity Contacts: phosphor bronze Vibration: 2 h in each of 3 mutually perpendicular planes, Polarizing Key: glass reinforced nylon, flame retardant frequency sweep 10 cps to 55 cps at 0.06 double amplitude (UL 94H-B) with no loss of continuity Contact Plating: gold (see Ordering Information) PHYSICAL SPECIFICATIONS Contact Type: bifurcated bellows Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side Contact Spacing: 0.156 (3.96 mm) center to center Card Thickness: 0.054 to 0.071 (1.37 mm to 1.80 mm) Card Slot Depth: dual readout = 0.330 (8.38 mm) Note High temperature burn-in, edgeboard connectors, 0.156 (3.96 mm) center to center are on www.vishay.com/doc 36006 ORDERING INFORMATION EB8 1 A 22 SG X A MODEL BODY MATERIAL STANDARD CONTACTS CONTACT PLATING MOUNTING POLARIZING TERMINAL PER SIDE VARIATIONS KEY POSITIONS VARIATIONS SG = selective gold plating Optional body 6, 10, 12, (0.00003 (0.000762 mm) minimum material Key(s) are located to A, C, D, 15, 18, 22, thick) on contact area with gold flash 1 = diallyl phthalate right of position(s) K, L, or E 24 or 25 on terminal 2 = phenolic designated. Required SGF = selective gold plating only when polarizing 3 = glass-filled (0.000010 (0.000254 mm) keys are to be factory polyester minimum thick) on contact area with installed 5 = glass-filled gold flash on terminal. polyphenylene All gold plating over 0.00005 sulfied (0.00127 mm) minimum nickel underplate. Contact factory for additional plating options. Revision: 19-Jul-2018 Document Number: 36005 1 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 EB8 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.030 (0.762) 0.060 (1.52) R Typ. 0.350 (8.89) Typ. A B D E C C 0.156 (3.96) Typ. See Table for Terminal Variations 0.250 0.340 (6.35) (8.64) 0.460 (11.70) Section C to C: Polarizing Key: 0.054 to 0.071 (1.37 to 1.80) 0.120 0.023 (3.05) (0.584) 0.330 (8.38) Depth of Card Insertion 0.325 (8.26) When ordering polarizing keys individually, specify by the Model Number: 0.200 PK-8 between contacts. Hand insertion tool, TPK-8, (5.08) provided upon request. OF CONTACT AB D E POSITIONS 6 1.78 (45.21) 1.531 (38.89) 1.240 (31.50) 1.100 (27.94) 10 2.41 (61.21) 2.156 (54.76) 1.864 (47.35) 1.724 (43.79) 12 2.72 (69.09) 2.469 (62.71) 2.176 (55.27) 2.036 (51.71) 15 3.19 (81.03) 2.937 (74.60) 2.644 (67.16) 2.504 (63.60) 18 3.66 (92.96) 3.406 (86.51) 3.112 (79.05) 2.972 (75.49) 22 4.28 (108.71) 4.031 (102.39) 3.736 (94.89) 3.596 (91.34) 24 4.59 (116.59) 4.344 (110.33) 4.051 (102.89) 3.911 (99.34) 25 4.75 (120.65) 4.500 (114.30) 4.207 (106.86) 4.067 (103.30) Revision: 19-Jul-2018 Document Number: 36005 2 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000